Mykal Sticky Stuff Remover Liquid 250ml Ref: 551150 Mykal Sticky Stuff Remover Mykal Sticky Stuff Remover is a powerful yet safe solution to those 'icky sticky' problems around the home. Sticky Stuff Remover zaps even difficult deposits such as tape and sticker residue, tar, grease, chewing gum, make-up and adhesives from glass, wood, metal, worktops and tiles, it can even be used on skin and hair. Even candle wax has met its match at last! Important: Sticky Stuff Remover is compatible with most surfaces. It is not however recommended for use on silk, leather, suede, polystyrene or rubber/foam backed carpets. For a spray gel version of Sticky Stuff Remover for vertical and inverted surfaces use Sticky Stuff Remover Spray Gel. Made in the UK 250ml   in stock. OUT OF STOCK Price:    £4.08 Including  VAT at 20%
	Quantity:   Enter e-mail address to tell a friend about this product Share:
Mykal Sticky Stuff Remover Liquid - Usage Instructions Usage Instructions: Always test Mykal Sticky Stuff Remover Liquid on a small unobtrusive area before use Mykal Sticky Stuff Remover Liquid can be used on skin and hair, it is important however that the treated area is washed thoroughly with soap and water after use. 1. For removing sticky labels or adhesive residue from hard surfaces. a) With high gloss labels try to remove as much of the gloss front part of the sticker manually. This will help the Mykal Sticky Stuff Remover Liquid to penetrate the adhesive backing. b) Drip Sticky Stuff Remover liberally onto a clean dry cloth and apply to the affected area. c) Leave Mykal Sticky Stuff Remover Liquid on the surface to work for 5-7 minutes. d) Gently scrape the residue off the surface using a non-scratch item, such as a plastic spatula. e) Wash surface with warm soapy water and rinse with clean water . Repeat if necessary. 2. Removing Oil, Grease, Tar, Crayon and similar stains from washable fabrics. a) Remove as much excess staining as possible. b) Drip Mykal Sticky Stuff Remover Liquid sparingly onto both sides of the fabric and leave for 5 minutes (10 for bad stains). c) Blot area with a dry absorbent material or kitchen roll. d) Re-apply Mykal Sticky Stuff Remover Liquid sparingly to both sides of the fabric and leave for one minute or so. e) Wash in accordance with manufacturers instructions - preferably use slightly more detergent and at the highest possible temperature setting recommended for the fabric. 3) Removing Chewing Gum or thicker coatings from hard surfaces. a) Remove as much as the deposit as possible manually without damaging the substrate. b) Pierce the surface of the gum/residue with a pin or similar to allow for Mykal Sticky Stuff Remover Liquid to penetrate the surface thoroughly, proceed as in 2-4 in (1) above.

Before checking out why not take a look at our clearance lines? - Find some Bargains - save £££ - Click here