HG Hagesan Impregnating Sealer (HG Impregnator) HGSEALER

Use HG Impregnating Sealer (HG Impregnator) to impregnate porous terracotta tiles, brick, quarry tiles, victorian tiles, flagstones, un-glazed (porcelain or ceramic) tiles and natural stone floors and walls to protect against stains and stubborn marks. For Marble, Travertine, Terrazzo, Limestone, Sandstone we recommend HG Marble and Natural Stone Impregnator which has smaller molecules and it is therefore slightly thinner to penetrate better on semi-porous materials. To check the porosity of a surface to see if treatment is required use a tablespoon of water on the surface. If after 5-10 minutes none of the water has been absorbed into the surface, the surface is sealed and HG Impregnator is NOT required. HG Impregnating Sealer (HG Impregnator) penetrates deep into the surface and completely seals off small pores. Larger pores are made smaller meaning liquid molecules can no longer be absorbed. However any dampness in the floor can still evaporate and the surfaces can still breathe. HG Impregnating Sealer leaves a matt finish, enhances natural colours and does not contain silicone. HG Impregnator is suitable for inside and outside use. When using HG Impregnator we recommend using Eye Protection and an Odour Respirator (for poorly vented areas) as well as protective gloves. For additional protection (after using HG Impregnating Sealer) on brick, slate and other natural stone inside floors apply HG Satin Gloss Polish (Golvpolish). For additional surface protection on Terracotta floor tiles apply HG Terracotta Shine Seal or HG Terracotta Wax - available in two colours. Coverage: approx. 8-10 m² per litre. 5 m² for 2 coats. 1 Litre