Case of 6 x HG Hagesan Laminate Gloss Coating HG208case

Directions for use: Before applying a new coat the floor (also new floors) should be cleaned with HG Laminate Powerful Cleaner. Completely remove old wax and polish layers. After cleaning, rinse the floor with a damp cloth and allow the floor to dry completely before applying HG Laminate Gloss Coating. The best results can be obtained by using a Non-Fluffy Cloth.. Dip the cloth in the solution and squeeze it out so it is damp (not too wet). Attach to a Floor Wiper or wrap securely around a sponge squeegee mop over which a plastic bag has been placed. Apply thinly and evenly in one direction only. Do not rub in. Do not treat more than 5 m² at a time. Regularly dip the cloth in the solution and squeeze out the excess. After approximately 45 minutes, the HG Laminate Gloss Coating will be dry and a second coat can be applied at right angles to the first coat (for extra shine and protection). After 3 hours the floor can be walked on. Avoid spillages or heavy wear for 24 hours until the coating has completely hardened. Maintenance: Wash or mop the floor with HG Laminate Wash and Shine add 100ml (one cup) to a full bucket of water (10 litre) and use the solution to wash/mop the floor. For quick daily cleaning use HG Laminate Daily Cleaner. Coverage: 60 m² per litre per coat. Attention: Only use on laminated floors with completely glued seams and not on click-laminate, veneer parquet, laminate parquet and other wooden floors that are not completely varnished because moisture penetrating between the seams can cause swelling.