image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Case of 4 x Wykamol Dryseal Cream 3 Litre

Product Code: WYK02(4)
£184.99
RRP £219.80 | SAVE £34.81
Item in Stock

Wykamol Dryseal is a water repelling, salt inhibiting masonry protection cream which is deeply penetrating and can be used on all types of masonry.

Product Features:
Easy application by brush, roller or low pressure spray
Protects against efflorescent salts which damage paintwork
Becomes effective immediately after drying period (approx. 3 hours)
Improves insulation by keeping surfaces dry
Can be applied to damp surfaces

With its unique thixotropic consistency and excellent water repellent properties on a range of building materials, Wykamol Dryseal Waterproofing Cream stands out. As opposed to conventional liquid products, Dryseal can be applied in just one working operation to achieve the desired loadings for maximum effectiveness. Dependent on porosity, the effective siloxane ingredient penetrates the substrate within a short time (30 minutes to several hours) where it reacts to become a polymer silicone resin.

The initial white layer disappears completely and, since the effective ingredient is the same as in conventional liquid water repellents, substrates treated with Wykamol Dryseal remain permeable to water vapour (allow the structure to ‘breathe’). Dryseal has been formulated to penetrate as deeply as possible into porous masonry substrates and this provides optimal protection against the absorption of water and pollutants as well as frost/salt damage.

This effect should not be confused with the "beading" effect often associated with water repellents. The beading effect demonstrates the surface action of a water repellent but may not be significant when assessing a product’s overall performance (resistance to rain water penetration under wind pressure). Protects houses, bridges and piers.

SPECIAL PROPERTIES:

+ Excellent penetration.
+ Alkali resistant
+ Compatible with damp substrates
+ Good coating properties
+ Aqueous formulation, low environmental impact
+ Thixotropic - Multi-coat performance in one application

Coverage: Approx. 20m² in a one coat application, dependent on substrate porosity

Size: 4 x 3 Litre

Also Available Individually Click HERE

To Download the Product Information Sheet (PDF) Click HERE

Substrates:
Dryseal is especially useful for treating cementitious materials including concrete blockwork as well as natural stone, clay and sand/lime bricks etc. The substrate must be in sound condition.

Structural defects such as cracks, open joints, etc. plus rising damp and hygroscopic moisture must be remedied first. It must be ensured that water and damaging salts dissolved in the water cannot penetrate behind the treated surface since this can lead to frost damage (spalling).

Before a water repellent impregnation is carried out, crusts of dirt and pollutants as well as efflorescence, algae and moss must be removed by a suitable cleaning procedure. Cleaning opens the pores and capillaries, allowing them to absorb the impregnation agent.

Dependent on the substrate, type and degree of soiling, we recommend the use of various Wykamol surface cleaners (e.g. Microtech Biocide). When cleaning, make sure that the masonry is damaged as little as possible. Chase out defective mortar joints and cracks and repair with a suitable re-pointing mortar. Close expansion and connection joints with elastic joint-sealing compounds.

Dryseal is not suitable for very dense, nonabsorbent substrates such as e.g. fine crystalline marble. Absorption of Dryseal is a prerequisite for optimal performance. This depends on the natural porosity and moisture content of the building material. For this reason, the substrate should be as dry as possible. If damaging salts are present, a quantitative salt analysis is essential. 

High salt concentrations (especially chlorides, nitrates and sulphates) may lead to damage that cannot be prevented by a water repellent treatment alone.

Adjoining surfaces: Due to the thixotropic nature of this product, where it is applied by brush or roller, accidental contamination of nontarget surfaces can usually be avoided by taking reasonable care.

However, where sprayed (see below), items such as windows and surfaces which are (or will be) varnished or painted, as well as plants, should be covered with polythene sheets.

Working instructions
Dryseal is applied to building materials undiluted in the desired layer thickness using airless spray equipment, a brush or lambskin roller. Dependent on the absorbency of the substrate, application rates of up to 0.3 l/m² can be applied in one working operation, even on vertical surfaces/ceilings without a loss of material. 


A second application can be carried out at any time but is usually not necessary. Resistance to rain is normally achieved within one hour of application.

Full cure up to two weeks depending on climactic conditions. Tools and equipment must be clean and dry prior to use but can be kept wrapped in plastic during short breaks in use. Clean thoroughly after use and before longer storage with water and/or white spirit.

Application Rate: Dependent on porosity, approx. 0.2 - 0.3l/m².

The required amount of Dryseal for calculation and tender should be determined on a sufficiently large trial area (1-2 m²). The effectiveness of the impregnation agent can also be tested on this area. 

Barcode: 5060207860468
Weight: 12.4kg

Storage: Store unopened, in frost free conditions
Shelf Life: 9 months in unopened packaging.

To Download the Safety Data Sheet (PDF) for Wykamol Dryseal Click HERE

Load more reviews

With its unique thixotropic consistency and excellent water repellent properties on a range of building materials, Wykamol Dryseal Waterproofing Cream stands out. As opposed to conventional liquid products, Dryseal can be applied in just one working operation to achieve the desired loadings for maximum effectiveness. Dependent on porosity, the effective siloxane ingredient penetrates the substrate within a short time (30 minutes to several hours) where it reacts to become a polymer silicone resin.

The initial white layer disappears completely and, since the effective ingredient is the same as in conventional liquid water repellents, substrates treated with Wykamol Dryseal remain permeable to water vapour (allow the structure to ‘breathe’). Dryseal has been formulated to penetrate as deeply as possible into porous masonry substrates and this provides optimal protection against the absorption of water and pollutants as well as frost/salt damage.

This effect should not be confused with the "beading" effect often associated with water repellents. The beading effect demonstrates the surface action of a water repellent but may not be significant when assessing a product’s overall performance (resistance to rain water penetration under wind pressure). Protects houses, bridges and piers.

SPECIAL PROPERTIES:

+ Excellent penetration.
+ Alkali resistant
+ Compatible with damp substrates
+ Good coating properties
+ Aqueous formulation, low environmental impact
+ Thixotropic - Multi-coat performance in one application

Coverage: Approx. 20m² in a one coat application, dependent on substrate porosity

Size: 4 x 3 Litre

Also Available Individually Click HERE

To Download the Product Information Sheet (PDF) Click HERE

Substrates:
Dryseal is especially useful for treating cementitious materials including concrete blockwork as well as natural stone, clay and sand/lime bricks etc. The substrate must be in sound condition.

Structural defects such as cracks, open joints, etc. plus rising damp and hygroscopic moisture must be remedied first. It must be ensured that water and damaging salts dissolved in the water cannot penetrate behind the treated surface since this can lead to frost damage (spalling).

Before a water repellent impregnation is carried out, crusts of dirt and pollutants as well as efflorescence, algae and moss must be removed by a suitable cleaning procedure. Cleaning opens the pores and capillaries, allowing them to absorb the impregnation agent.

Dependent on the substrate, type and degree of soiling, we recommend the use of various Wykamol surface cleaners (e.g. Microtech Biocide). When cleaning, make sure that the masonry is damaged as little as possible. Chase out defective mortar joints and cracks and repair with a suitable re-pointing mortar. Close expansion and connection joints with elastic joint-sealing compounds.

Dryseal is not suitable for very dense, nonabsorbent substrates such as e.g. fine crystalline marble. Absorption of Dryseal is a prerequisite for optimal performance. This depends on the natural porosity and moisture content of the building material. For this reason, the substrate should be as dry as possible. If damaging salts are present, a quantitative salt analysis is essential. 

High salt concentrations (especially chlorides, nitrates and sulphates) may lead to damage that cannot be prevented by a water repellent treatment alone.

Adjoining surfaces: Due to the thixotropic nature of this product, where it is applied by brush or roller, accidental contamination of nontarget surfaces can usually be avoided by taking reasonable care.

However, where sprayed (see below), items such as windows and surfaces which are (or will be) varnished or painted, as well as plants, should be covered with polythene sheets.

Working instructions
Dryseal is applied to building materials undiluted in the desired layer thickness using airless spray equipment, a brush or lambskin roller. Dependent on the absorbency of the substrate, application rates of up to 0.3 l/m² can be applied in one working operation, even on vertical surfaces/ceilings without a loss of material. 


A second application can be carried out at any time but is usually not necessary. Resistance to rain is normally achieved within one hour of application.

Full cure up to two weeks depending on climactic conditions. Tools and equipment must be clean and dry prior to use but can be kept wrapped in plastic during short breaks in use. Clean thoroughly after use and before longer storage with water and/or white spirit.

Application Rate: Dependent on porosity, approx. 0.2 - 0.3l/m².

The required amount of Dryseal for calculation and tender should be determined on a sufficiently large trial area (1-2 m²). The effectiveness of the impregnation agent can also be tested on this area. 

Barcode: 5060207860468
Weight: 12.4kg

Storage: Store unopened, in frost free conditions
Shelf Life: 9 months in unopened packaging.

To Download the Safety Data Sheet (PDF) for Wykamol Dryseal Click HERE

Load more reviews

Associated Products


image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960