Free UK Delivery
On Orders Over £75
We're here for you
Have a question? Call 01733 241960
Associated Products
Case of 6 x HG Natural Stone Protective Coating Gloss Finish 1 Litre
Product Code: MARBLSHINEcase
£75.33
RRP £90.54 | SAVE £15.21
Item in Stock
HG Natural Stone Protective Coating Gloss Finish provides a thin self-shining protective coating on marble floors and other natural stone.
Product Features:
Provides a thin self-shining coating which protects the surfaces from dirt
Prevents stains, scratching and stubborn dirt
Deepens the colour and veining on marbles and other natural stones
HG Natural Stone Protective Coating Gloss Finish provides a thin self-shining protective coating on marble floors and other natural stone. This means that the pores are completely sealed. Dirt does not stand a chance.
HG Natural Stone Protective Coating Gloss Finish deepens the colour and veining on marbles and other natural stones, whilst preventing stains, scratching and stubborn dirt. HG Marble and Natural Stone Shine Finish is also alcohol-resistant.
Prior to applying HG Natural Stone Protective Coating Gloss Finish, the surface should be thoroughly cleaned with HG Marble and Natural Stone Stripper. Or in the case of cement or grout film residues, use HG Marble and Cement and Lime Film Remover.
Fo regular maintenance use HG Marble and Natural Stone Wash and Shine. To strip old coats of Marble Shine Finish use HG Marble and Natural Stone Stripper.
Coverage: 60-80 m² per litre per layer, depending on the suction force of the floor.
6 x 1 Litre
Directions for use:
Prior to applying HG Marble and Natural Stone Shine Finish the surface should be thoroughly cleaned with HG Marble and Natural Stone Stripper. Or in the case of cement or grout film residues, use HG Marble and Cement and Lime Film Remover. Allow the floor to dry for 3 days, in case of floor heating, 24 hours.
Underfloor heating should be switched off 12 hours before treatment with HG Marble and Natural Stone Shine Finish.
Apply by hand: Dilute HG Marble Shine Finish with equal part of clean water. Apply HG Natural Stone Shine Finish with a wax applicator or Non-Fluffy Cloth., spread thin and evenly in one direction, and allow to dry for 45 minutes, before applying a second coat at right angles from the first coat.
It is possible to walk over the protection after 3 hours. The layer has completely cured after 3 days. Do NOT rub or buff, but leave to dry naturally.
Apply by polishing machine: Dilute HG Natural Stone Shine Finish with equal part of clean water. Spray dilution on no more than 25 sq/ft of surface and polish with machine fitted with felt or white synthetic pad, and polish at 300 rpm.
Regular maintenance: Use HG Marble and Natural Stone Wash and Shine. To strip old coats of HG Marble and Natural Stone Shine Finish use HG Marble and Natural Stone Stripper.
Coverage: 60-80 m² per litre per layer, depending on the suction force of the floor.
Attention: Do not stir or shake the bottle before use. Do not apply HG Marble and Natural Stone Shine Finish on surfaces to be treated with HG Marble Protector
Barcode: 8711577029593
Weight: 7.5kg
Load more reviews
HG Natural Stone Protective Coating Gloss Finish provides a thin self-shining protective coating on marble floors and other natural stone. This means that the pores are completely sealed. Dirt does not stand a chance.
HG Natural Stone Protective Coating Gloss Finish deepens the colour and veining on marbles and other natural stones, whilst preventing stains, scratching and stubborn dirt. HG Marble and Natural Stone Shine Finish is also alcohol-resistant.
Prior to applying HG Natural Stone Protective Coating Gloss Finish, the surface should be thoroughly cleaned with HG Marble and Natural Stone Stripper. Or in the case of cement or grout film residues, use HG Marble and Cement and Lime Film Remover.
Fo regular maintenance use HG Marble and Natural Stone Wash and Shine. To strip old coats of Marble Shine Finish use HG Marble and Natural Stone Stripper.
Coverage: 60-80 m² per litre per layer, depending on the suction force of the floor.
6 x 1 Litre
Directions for use:
Prior to applying HG Marble and Natural Stone Shine Finish the surface should be thoroughly cleaned with HG Marble and Natural Stone Stripper. Or in the case of cement or grout film residues, use HG Marble and Cement and Lime Film Remover. Allow the floor to dry for 3 days, in case of floor heating, 24 hours.
Underfloor heating should be switched off 12 hours before treatment with HG Marble and Natural Stone Shine Finish.
Apply by hand: Dilute HG Marble Shine Finish with equal part of clean water. Apply HG Natural Stone Shine Finish with a wax applicator or Non-Fluffy Cloth., spread thin and evenly in one direction, and allow to dry for 45 minutes, before applying a second coat at right angles from the first coat.
It is possible to walk over the protection after 3 hours. The layer has completely cured after 3 days. Do NOT rub or buff, but leave to dry naturally.
Apply by polishing machine: Dilute HG Natural Stone Shine Finish with equal part of clean water. Spray dilution on no more than 25 sq/ft of surface and polish with machine fitted with felt or white synthetic pad, and polish at 300 rpm.
Regular maintenance: Use HG Marble and Natural Stone Wash and Shine. To strip old coats of HG Marble and Natural Stone Shine Finish use HG Marble and Natural Stone Stripper.
Coverage: 60-80 m² per litre per layer, depending on the suction force of the floor.
Attention: Do not stir or shake the bottle before use. Do not apply HG Marble and Natural Stone Shine Finish on surfaces to be treated with HG Marble Protector
Barcode: 8711577029593
Weight: 7.5kg
Load more reviews
×
{0}
Associated Products
Free UK Delivery
On Orders Over £75
We're here for you
Have a question? Call 01733 241960