image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Case of 6 x HG Natural Stone Impregnating Protector 1 Litre Product 32

Product Code: HGP32case
£147.69
RRP £170.64 | SAVE £22.95
Item in Stock

Case of 6 x HG Natural Stone Impregnating Protector (Product 32) 1 Litre HG Natural Stone Impregnating Protector is used to impregnate porous marble, travertine, terrazzo, granito, slate, sandstone, limestone and other natural stone floors and walls to protect against stains and stubborn marks.

Product Features:
Protect against stains and stubborn marks
Penetrates deep into the surface and completely seals off small pores
Leaves a matt finish enhances natural colours

Case of 6 x HG Natural Stone Impregnating Protector (Product 32) 1 Litre

HG Natural Stone Impregnating Protector is used to impregnate porous marble, travertine, terrazzo, granito, slate, sandstone, limestone and other natural stone floors and walls to protect against stains and stubborn marks. Extremely suitable for concrete tiles with pieces of natural stone incorporated such as marble composites.

For terracotta tiles, brick, quarry tiles, victorian tiles, flagstones, un-glazed (porcelain or ceramic) tiles we recommend HG Impregnating Protector Sealer (HGP13) which has larger molecules and it is therefore slightly thicker making it more suitable for more porous materials.

To check the porosity of a surface to see if treatment is required use a tablespoon of water. If after 5-10 minutes none of the water has been absorbed into the surface the surface is sealed.

HG Natural Stone Impregnating Protector penetrates deep into the surface and completely seals off small pores. Larger pores are made smaller meaning liquid molecules can no longer be absorbed preventing the formation of stains and dirt. However, any dampness in the floor can still evaporate.

HG Natural Stone Impregnating Protector still allows the stone to breathe. Does not change (or hardly changes) the original characteristics of the material. 

HG Natural Stone Impregnating Protector leaves a matt finish enhances natural colours, does not contain silicone. It is suitable for inside and outside use. 

Coverage: Highly porous natural stone: 10-20 m² per litre. Slightly porous and high gloss natural stone 20-50 m² per litre.

Make sure that an existing floor has not yet been treated with HGNatural Stone Impregnating Protector (HGP32) or another similar basictreatment. Carry out a porosity test if unsure. It is advisable to

ventilate well during the use of this product in order to speed up the drying process.

1. The surface to be treated with HG Natural Stone  Impregnating Protector (HGP32) must be perfectly clean and free from grease and dirt. For the removal of cement and mortar stains, first clean with HG Natural Stone Cement Grout Film Remover. Grime and old wax and polish layers have to be removed beforehand with HG Natural Stone Cleaner Extra Strong. Leave the floor to dry for 3 days after using HG Marble Stripper. For really dirty floors use HG Tile Cleaner Extra Strong.

After rinsing off allow at least 3 days (24 hours with under floor heating) for the surface to dry thoroughly to ensure that Impregnating Protector can be fully absorbed. Highly porous tiles such as Sandstone, will need even more time to completely get rid of the water. For this type of tile we recommend at least 1 week (24 hours with under floor heating).

2. The glue/cement and grouting of new floors must be completely hardened and dry. The drying time is usually 4-6 weeks.

3. HG Natural Stone Impregnating Protector is used neat (undiluted). Apply evenly, in one direction with our Superfine Roller.

TIP: On (high) gloss floors, HG Natural Stone Impregnating Protector must be applied and polished out using a lint free cloth.

4. If the HG Natural Stone Impregnating Protector has not penetrated and remains on the tiles 10 minutes (maximum) after application this will need to be removed straight away with a clean lint-free cloth.

If the HG Natural Stone Impregnating Protector is fully absorbed and no surplus is required to be wiped off, a second/third treatment may be needed until the Natural Stone Impregnating Protector is no longer absorbed.

* VERY IMPORTANT: Over application of Natural Stone Impregnating Protector is very common - a second coat is rarely needed and excess HG Natural Stone Impregnating Protector needs to be removed quickly. Excess Natural Stone Impregnating Protector will sit on the surface and will give a streaky appearance if left. If the Impregnator is allowed to dry on the surface it CANNOT be removed - it will have to be left to wear off.

After treatment with HG Natural Stone Impregnating Protector the surface should retain a matt appearance. Allow at least one hour before applying a second or more coats depending on porosity. 

5. After approx. 3 hours the surface can be walked upon and is completely protected 12 hours after the final treatment.

Once absorbed the treatment of HG Natural Stone Impregnating Protector is permanent. For additional surface protection see HG Natural  Stone Protector (HGP33).

Coverage: Highly porous natural stone: 10-20 m² per litre. Slightly porous and high gloss natural stone 20-50 m² per litre.

Maintenance: Use HG Natural Stone Cleaner Shine Restorer (HGP37) or HG Natural Stone Cleaner Streak Free (HGP38).

Attention: Keep in a frost free area. When using HG Natural Stone Impregnating Protector we recommend using protective gloves. 

TIP: If a floor treated with this product is not also treated with a specific surface protector such as HG Natural Stone Protector (HGP33) we recommend repeating treatment with this product

every 1 to 2 years in walkways and intensively used areas. Protection of  the top layer by this product will gradually be reduced as a result of general wear.

Barcode: 8711577115340
Weight: 7kg

Load more reviews

Case of 6 x HG Natural Stone Impregnating Protector (Product 32) 1 Litre

HG Natural Stone Impregnating Protector is used to impregnate porous marble, travertine, terrazzo, granito, slate, sandstone, limestone and other natural stone floors and walls to protect against stains and stubborn marks. Extremely suitable for concrete tiles with pieces of natural stone incorporated such as marble composites.

For terracotta tiles, brick, quarry tiles, victorian tiles, flagstones, un-glazed (porcelain or ceramic) tiles we recommend HG Impregnating Protector Sealer (HGP13) which has larger molecules and it is therefore slightly thicker making it more suitable for more porous materials.

To check the porosity of a surface to see if treatment is required use a tablespoon of water. If after 5-10 minutes none of the water has been absorbed into the surface the surface is sealed.

HG Natural Stone Impregnating Protector penetrates deep into the surface and completely seals off small pores. Larger pores are made smaller meaning liquid molecules can no longer be absorbed preventing the formation of stains and dirt. However, any dampness in the floor can still evaporate.

HG Natural Stone Impregnating Protector still allows the stone to breathe. Does not change (or hardly changes) the original characteristics of the material. 

HG Natural Stone Impregnating Protector leaves a matt finish enhances natural colours, does not contain silicone. It is suitable for inside and outside use. 

Coverage: Highly porous natural stone: 10-20 m² per litre. Slightly porous and high gloss natural stone 20-50 m² per litre.

Make sure that an existing floor has not yet been treated with HGNatural Stone Impregnating Protector (HGP32) or another similar basictreatment. Carry out a porosity test if unsure. It is advisable to

ventilate well during the use of this product in order to speed up the drying process.

1. The surface to be treated with HG Natural Stone  Impregnating Protector (HGP32) must be perfectly clean and free from grease and dirt. For the removal of cement and mortar stains, first clean with HG Natural Stone Cement Grout Film Remover. Grime and old wax and polish layers have to be removed beforehand with HG Natural Stone Cleaner Extra Strong. Leave the floor to dry for 3 days after using HG Marble Stripper. For really dirty floors use HG Tile Cleaner Extra Strong.

After rinsing off allow at least 3 days (24 hours with under floor heating) for the surface to dry thoroughly to ensure that Impregnating Protector can be fully absorbed. Highly porous tiles such as Sandstone, will need even more time to completely get rid of the water. For this type of tile we recommend at least 1 week (24 hours with under floor heating).

2. The glue/cement and grouting of new floors must be completely hardened and dry. The drying time is usually 4-6 weeks.

3. HG Natural Stone Impregnating Protector is used neat (undiluted). Apply evenly, in one direction with our Superfine Roller.

TIP: On (high) gloss floors, HG Natural Stone Impregnating Protector must be applied and polished out using a lint free cloth.

4. If the HG Natural Stone Impregnating Protector has not penetrated and remains on the tiles 10 minutes (maximum) after application this will need to be removed straight away with a clean lint-free cloth.

If the HG Natural Stone Impregnating Protector is fully absorbed and no surplus is required to be wiped off, a second/third treatment may be needed until the Natural Stone Impregnating Protector is no longer absorbed.

* VERY IMPORTANT: Over application of Natural Stone Impregnating Protector is very common - a second coat is rarely needed and excess HG Natural Stone Impregnating Protector needs to be removed quickly. Excess Natural Stone Impregnating Protector will sit on the surface and will give a streaky appearance if left. If the Impregnator is allowed to dry on the surface it CANNOT be removed - it will have to be left to wear off.

After treatment with HG Natural Stone Impregnating Protector the surface should retain a matt appearance. Allow at least one hour before applying a second or more coats depending on porosity. 

5. After approx. 3 hours the surface can be walked upon and is completely protected 12 hours after the final treatment.

Once absorbed the treatment of HG Natural Stone Impregnating Protector is permanent. For additional surface protection see HG Natural  Stone Protector (HGP33).

Coverage: Highly porous natural stone: 10-20 m² per litre. Slightly porous and high gloss natural stone 20-50 m² per litre.

Maintenance: Use HG Natural Stone Cleaner Shine Restorer (HGP37) or HG Natural Stone Cleaner Streak Free (HGP38).

Attention: Keep in a frost free area. When using HG Natural Stone Impregnating Protector we recommend using protective gloves. 

TIP: If a floor treated with this product is not also treated with a specific surface protector such as HG Natural Stone Protector (HGP33) we recommend repeating treatment with this product

every 1 to 2 years in walkways and intensively used areas. Protection of  the top layer by this product will gradually be reduced as a result of general wear.

Barcode: 8711577115340
Weight: 7kg

Load more reviews

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960