We're here for you
Have a question? Call 01733 241960
Associated Products
Rustins Plastic Floor Coating Satin 4 Litre
Product Code: PCFS4000
£71.59
RRP £83.34 | SAVE £11.75
Item out of Stock
PLEASE
NOTE: The sale of this product is restricted by law. From 1/10/23, new
government legislation will require all purchasers to provide Photo
identification, Statement of the nature of the business and business VAT
registration number.
You will be contacted by email to provide this. Proceeding beyond this point, you are agreeing to the above.
Product Features:
Does not yellow or craze with age
For use on wood, chipboard, MDF, cork, laminates, slate & stone
Resistant to scratching, abrasion, most solvents, weak acids and alkalis.
Almost colourless
Excellent adhesion and durability
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
Rustins Clear Plastic Floor Coating Satin is a two-part cold cure lacquer with excellent adhesion and durability. Almost colourless and will not craze or yellow on ageing. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1- 1.5 hours, floor can be used 2 hours after last coat has been applied.
Type: A two-part cold cure finish, based on Urea Formaldehyde resins, plasticised with alkyd.
Special Features: Quick-drying. Non-yellowing on ageing. The finish is highly durable, resistant to impact, abrasion and solvents. Enhances the colour of the wood. The coating is almost colourless, but some woods change colour when coated. See product packaging for further information.
Coverage: 13-15m² per litre, 1 coat, depending on the absorbency of the wood.
Coverage: 13-15m² per litre, 1 coat, depending on the absorbency of the wood.
Size: 4 Litre
Also Available in 1 Litre Size
Intended Use Bare wood, hardboard, MDF, unsealed cork, slate, and vinyl tiles. For use on interior floors only.
Preparation The surface must be clean, smooth, dry and free from wax, dust and contaminants. Read the full instructions on the tin. Our sheet on renovating floors contains further information. Nail holes and small cracks may be filled with Rustin’s Wood filler. Bare wood may be dyed before coating with Rustins Wood Dye. Other brands of dye, stain or paints may be incompatible. Do not apply Knotting or Sanding Sealer.
Application Using a large brush or varnish roller, apply evenly and liberally, finishing in the direction of the grain. Rustin’s Plastic Coating Thinners (up to 10%) may be added to aid the application in hot weather. No other thinners may be added to the coating.
Coats 2 coats are usually sufficient on hardwood floors, but in heavy traffic areas, apply 3 coats. Softwoods and cork may require a minimum of 3 coats, depending on the absorbency. Commercial premises may require 4 coats.
Drying Time The coating is generally touch-dry within 30 minutes – 1 hour, depending on the temperature.
Re-coating Time May be re-coated after a minimum of 1 hour.
Application Temp. Ideally 15-25ºC. Do not use below 15ºC, or in conditions of high humidity.
Maintenance The coating will accept light foot traffic 2 hours after the final coat and will take 7 days to fully harden. During this period, it should be protected from heavy wear and spills. Afterwards, the surface may be kept clean by mopping with a mild detergent solution. To restore the gloss, use Rustin’s Floor Shine. Worn areas may be re-coated once cleaned and sanded, to provide a key. It is not necessary to re-coat the whole floor.
Compatibility The coating may be used over Rustins Wood filler, or Wood Dye and wood may be bleached before coating, with Rustins Wood Bleach. Important. If any other products are used, such as timber treatments or other brands of dye, stain or paints, these must be tested first for compatibility.
Settlement STIR WELL BEFORE AND DURING USE. Satin finishes may dry glossy if not stirred.
Clean-Up Clean equipment immediately after use with Rustin’s Plastic Coating Thinners or Rustin’s Cellulose Thinners, as once hardened, the coating cannot be removed.
Barcode: 5015332400621
Weight: 4.25 Kg
Shelf-life/Storage Many years if stored in original, tightly closed containers in normal conditions.
Load more reviews
Rustins Clear Plastic Floor Coating Satin is a two-part cold cure lacquer with excellent adhesion and durability. Almost colourless and will not craze or yellow on ageing. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1- 1.5 hours, floor can be used 2 hours after last coat has been applied.
Type: A two-part cold cure finish, based on Urea Formaldehyde resins, plasticised with alkyd.
Special Features: Quick-drying. Non-yellowing on ageing. The finish is highly durable, resistant to impact, abrasion and solvents. Enhances the colour of the wood. The coating is almost colourless, but some woods change colour when coated. See product packaging for further information.
Coverage: 13-15m² per litre, 1 coat, depending on the absorbency of the wood.
Coverage: 13-15m² per litre, 1 coat, depending on the absorbency of the wood.
Size: 4 Litre
Also Available in 1 Litre Size
Intended Use Bare wood, hardboard, MDF, unsealed cork, slate, and vinyl tiles. For use on interior floors only.
Preparation The surface must be clean, smooth, dry and free from wax, dust and contaminants. Read the full instructions on the tin. Our sheet on renovating floors contains further information. Nail holes and small cracks may be filled with Rustin’s Wood filler. Bare wood may be dyed before coating with Rustins Wood Dye. Other brands of dye, stain or paints may be incompatible. Do not apply Knotting or Sanding Sealer.
Application Using a large brush or varnish roller, apply evenly and liberally, finishing in the direction of the grain. Rustin’s Plastic Coating Thinners (up to 10%) may be added to aid the application in hot weather. No other thinners may be added to the coating.
Coats 2 coats are usually sufficient on hardwood floors, but in heavy traffic areas, apply 3 coats. Softwoods and cork may require a minimum of 3 coats, depending on the absorbency. Commercial premises may require 4 coats.
Drying Time The coating is generally touch-dry within 30 minutes – 1 hour, depending on the temperature.
Re-coating Time May be re-coated after a minimum of 1 hour.
Application Temp. Ideally 15-25ºC. Do not use below 15ºC, or in conditions of high humidity.
Maintenance The coating will accept light foot traffic 2 hours after the final coat and will take 7 days to fully harden. During this period, it should be protected from heavy wear and spills. Afterwards, the surface may be kept clean by mopping with a mild detergent solution. To restore the gloss, use Rustin’s Floor Shine. Worn areas may be re-coated once cleaned and sanded, to provide a key. It is not necessary to re-coat the whole floor.
Compatibility The coating may be used over Rustins Wood filler, or Wood Dye and wood may be bleached before coating, with Rustins Wood Bleach. Important. If any other products are used, such as timber treatments or other brands of dye, stain or paints, these must be tested first for compatibility.
Settlement STIR WELL BEFORE AND DURING USE. Satin finishes may dry glossy if not stirred.
Clean-Up Clean equipment immediately after use with Rustin’s Plastic Coating Thinners or Rustin’s Cellulose Thinners, as once hardened, the coating cannot be removed.
Barcode: 5015332400621
Weight: 4.25 Kg
Shelf-life/Storage Many years if stored in original, tightly closed containers in normal conditions.
Load more reviews
×
{0}
Associated Products
We're here for you
Have a question? Call 01733 241960