image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Bonda G4 Pond Sealer 2.5kg Blue

Product Code: BON12014
£45.95
RRP £54.00 | SAVE £8.05
Item out of Stock

G4 Pond Sealer is a moisture-cured polyurethane, which forms a non-porous seal on concrete, brick or porous stone.

Product Features:
Deep bonding plastic coating for concrete rendered ponds
Seals concrete floors
Quick and easy to apply
No primer needed
Can be used at low temperatures

I'm sorry, we've sold out

Don't worry, if you enter your email below we'll notify you when it's back in stock!

Bonda G4 Pond Sealer is a moisture-cured polyurethane, which forms a

non-porous seal on concrete, brick or porous stone.
G4 uses the moisture

in the air and substrate to cure or harden.
It can be applied onto

slightly damp substrates. However, it is important that the substrate is

sufficiently dry to be porous so as to enable the first coat of G4 to

bond and obtain a mechanical grip.
G4 can be applied in poor weather

conditions, high humidity and at temperatures down to 0°C.
G4 seals out

lime.

G4 will not seal concrete or lightweight blocks, these must be rendered before application.
G4 Cannot be used on bitumen or pond liners.

Finish Colour: Blue
Size: 2.5kg

Directions For Use:

Ensure cement render is clean, dry and porous - highly trowelled surfaces are not advised.
New render should be allowed to harden for 21-28 days depending on conditions.
Reinforcing fibres in the cement must be burnt or sanded off before coating.

Repair cracks and damaged areas.

Apply first coat by brush, avoid thick coats, and allow to become fingerprint dry or dry enough to walk carefully upon, approximately 60-90 minutes, depending on humidity.
Apply subsequent coats following above instructions.
Do not allow longer than 4 hours to elapse between each coat. Normally 3 coats of G4 Standard are sufficient but on very porous or rough surfaces a 4th coat may be required.
Rain will affect uncured G4 so make provision for covering if rain is expected.

Allow to harden for 72 hours before washing down with clean water.

With Coloured G4 the first two coats are G4 standard follwed by 2 coats of coloured G4. Follow instructions as detailed above.

Consumption varies slightly depending on porosity. On normal porous cement renders.
G4 Standard - 3 coats  = 550g/sq.m (for 3 coats)
G4 Coloured - 2 coats G4 Standard = 410g/sq.m (for 2 coats)
                 - 2 Coats G4 Coloured = 400g/sq.m (for 2 coats)

G.R.P. Pools - For instructions on repairing glass fibre pools or for coating concrete pools with glassfibre, contact Bondaglass.

Barcode: 5014197120149
Weight:
2.5kg

Preparation

Ensure cement render is clean, dry and porous –highly trowelled surfaces are not advised.
Repair cracks and damaged areas.

Application
Apply the first coat by brush, avoid thick coats,the subsequent coats can be thinned and sprayed.

Coats
G4 standard 3 coats. G4 Coloured needs 2 coats of G4 standard, then 2 coats of G4 coloured.

Drying Time
Can be walked upon in 60-90 minutes.

Re-coating Time
Recoat in 60-90 minutes between coats. Do not allow 4 hours to elapse between coats.

Application Temp.
G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C

Coverage
550g/sq.m.

Load more reviews

Bonda G4 Pond Sealer is a moisture-cured polyurethane, which forms a

non-porous seal on concrete, brick or porous stone.
G4 uses the moisture

in the air and substrate to cure or harden.
It can be applied onto

slightly damp substrates. However, it is important that the substrate is

sufficiently dry to be porous so as to enable the first coat of G4 to

bond and obtain a mechanical grip.
G4 can be applied in poor weather

conditions, high humidity and at temperatures down to 0°C.
G4 seals out

lime.

G4 will not seal concrete or lightweight blocks, these must be rendered before application.
G4 Cannot be used on bitumen or pond liners.

Finish Colour: Blue
Size: 2.5kg

Directions For Use:

Ensure cement render is clean, dry and porous - highly trowelled surfaces are not advised.
New render should be allowed to harden for 21-28 days depending on conditions.
Reinforcing fibres in the cement must be burnt or sanded off before coating.

Repair cracks and damaged areas.

Apply first coat by brush, avoid thick coats, and allow to become fingerprint dry or dry enough to walk carefully upon, approximately 60-90 minutes, depending on humidity.
Apply subsequent coats following above instructions.
Do not allow longer than 4 hours to elapse between each coat. Normally 3 coats of G4 Standard are sufficient but on very porous or rough surfaces a 4th coat may be required.
Rain will affect uncured G4 so make provision for covering if rain is expected.

Allow to harden for 72 hours before washing down with clean water.

With Coloured G4 the first two coats are G4 standard follwed by 2 coats of coloured G4. Follow instructions as detailed above.

Consumption varies slightly depending on porosity. On normal porous cement renders.
G4 Standard - 3 coats  = 550g/sq.m (for 3 coats)
G4 Coloured - 2 coats G4 Standard = 410g/sq.m (for 2 coats)
                 - 2 Coats G4 Coloured = 400g/sq.m (for 2 coats)

G.R.P. Pools - For instructions on repairing glass fibre pools or for coating concrete pools with glassfibre, contact Bondaglass.

Barcode: 5014197120149
Weight:
2.5kg

Preparation

Ensure cement render is clean, dry and porous –highly trowelled surfaces are not advised.
Repair cracks and damaged areas.

Application
Apply the first coat by brush, avoid thick coats,the subsequent coats can be thinned and sprayed.

Coats
G4 standard 3 coats. G4 Coloured needs 2 coats of G4 standard, then 2 coats of G4 coloured.

Drying Time
Can be walked upon in 60-90 minutes.

Re-coating Time
Recoat in 60-90 minutes between coats. Do not allow 4 hours to elapse between coats.

Application Temp.
G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C

Coverage
550g/sq.m.

Load more reviews

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960