Rustins High Gloss White Paint 1 Litre
Rustins High Gloss White Paint with 15 year protection is a one component, high gloss coating for metal, wood, aluminium, concrete and G.R.P.
Formulated from premium quality moisture cured polyurethane with light fast pigments, It has exceptional stability against U.V. light with outstanding non-yellowing and non-chalking qualities.
The coating has a combination of hardness and flexibility plus toughness, abrasion resistance and resistance to most usual chemicals.
For interior and exterior use.
Colour: White
Size: 1 Litre
Directions For Use:
Preparation:
Whilst High Gloss White Paint can be applied to damp surfaces it is advised that all surfaces are dry.
Surfaces must be clean, free of grease, wax rust and flaking paint. It is advised that where possible all surfaces are abraded.
It can applied at a wide range of temperatures (down to 0C) and in humid conditions.
Application:
Shake well before use. Apply in thin coats sinc thick coats can blister.
High Gloss White Paint can be applied by brush, roller, or spray. Keep lid on tin when not in use.
Protect hands with gloves and barrier cream. If in contact with skin, wipe off and wash with soap and water. Harmless to skin but difficult to remove.
Use in a well ventilated area.
New or stripped paint: Prime with an appropriate orimer and undercoat which should be allowed to harden thoroughly. Apply 1 or 2 coats or as required.
Re-painting: Rub down with abrasive paper and wash with a mild detergent solution rinse thoroughly and allow to dry.
Any small areas may be spot primed with the paint, then apply 1-2 coats as required. The second coat should be applied within 24 hours for optimum results but can be applied when the previous coat is touch-dry.
Carefully wipe excess material from the lid and re-seal, unless this is done rapid thickening will result.
Storage life of opened cans is limited.
Drying Time:
The coating dries to a tack free surface within 60-90 minutes depending on ambient temperature and can be re-coated once the surface is finger tacky.
Usage:
For non porous surfaces allow 140ml per sqm per coat and for porous surfaces 220ml per sqm per coat.
For wood and other slightly porous surfaces 3 coats are advised. For all porous surfaces 3 coats are necessary, allow 500ml per sqm for the 3 coats, depending on porosity.
Cleaning:
Remove as much product as possible from brushes before cleaning.
Clean brushes whilst wet with cellulose thinners and then wash thoroughly.
Formulated from premium quality moisture cured polyurethane with light fast pigments, It has exceptional stability against U.V. light with outstanding non-yellowing and non-chalking qualities.
The coating has a combination of hardness and flexibility plus toughness, abrasion resistance and resistance to most usual chemicals.
For interior and exterior use.
Colour: White
Size: 1 Litre
Directions For Use:
Preparation:
Whilst High Gloss White Paint can be applied to damp surfaces it is advised that all surfaces are dry.
Surfaces must be clean, free of grease, wax rust and flaking paint. It is advised that where possible all surfaces are abraded.
It can applied at a wide range of temperatures (down to 0C) and in humid conditions.
Application:
Shake well before use. Apply in thin coats sinc thick coats can blister.
High Gloss White Paint can be applied by brush, roller, or spray. Keep lid on tin when not in use.
Protect hands with gloves and barrier cream. If in contact with skin, wipe off and wash with soap and water. Harmless to skin but difficult to remove.
Use in a well ventilated area.
New or stripped paint: Prime with an appropriate orimer and undercoat which should be allowed to harden thoroughly. Apply 1 or 2 coats or as required.
Re-painting: Rub down with abrasive paper and wash with a mild detergent solution rinse thoroughly and allow to dry.
Any small areas may be spot primed with the paint, then apply 1-2 coats as required. The second coat should be applied within 24 hours for optimum results but can be applied when the previous coat is touch-dry.
Carefully wipe excess material from the lid and re-seal, unless this is done rapid thickening will result.
Storage life of opened cans is limited.
Drying Time:
The coating dries to a tack free surface within 60-90 minutes depending on ambient temperature and can be re-coated once the surface is finger tacky.
Usage:
For non porous surfaces allow 140ml per sqm per coat and for porous surfaces 220ml per sqm per coat.
For wood and other slightly porous surfaces 3 coats are advised. For all porous surfaces 3 coats are necessary, allow 500ml per sqm for the 3 coats, depending on porosity.
Cleaning:
Remove as much product as possible from brushes before cleaning.
Clean brushes whilst wet with cellulose thinners and then wash thoroughly.