Associated Products
Brummer Peel Release Coat Pre Decorating Wallpaper 1 Litre
Brummer Peel Release Coat Pre Decorating Wallpaper is ideal for TV, theatre, exhibitions or displays, the paper can be re-used.
Brummer Peel Release Coat Pre Decorating Wallpaper 1 Litre
Brummer Peel Release Coat Pre Decorating is a revolutionary product which allows wall coverings to be removed from a wall or surface without soaking or scraping. Simply coat the walls with Brummer Peel before you hang your paper and when you redecorate, the old paper pulls off in complete lengths. Ideal for TV, theatre, exhibitions or displays, the paper can be re-used and the panels and displays may also be re-used and the application of Peel avoids all the soaking and scraping normally associated with paper and fabric.
Type: Wax-based water-borne release coat.
Intended Use: For application onto most walls including plaster, plywood, hardboard etc. prior to hanging of wall coverings using normal adhesive systems in order to facilitate the subsequent easy removal of said wall coverings during redecoration without the need for soaking, steaming and scraping.
Special Features: Non-flammable. Low VOC content. Has pale green tint to indicate where Peel has been applied. User friendly. Gives high shear strength bonding of wallcoverings, but relatively low peel strength for easy removal. Enables quick redecoration with significant savings in time and labour costs. May be painted over if such a finish is required in the future
Coverage: Approx 25m² per Litre
Size: 1 Litre
Also Available: Brummer Peel Release Coat Pre Decorating Wallpaper 5 Litre
Brummer Peel Release Coat Pre Decorating Wallpaper Usage Instructions
1. The wall surface must be smooth, clean, sound and completely dry.
2. Mix one and a half to two litres of cold water with contents and stir thoroughly.
3. Apply uniformly to the wall surface, brush well out and avoid going back over the coated area.
4. The diluted mix will cover a wall area equivalent to approx 4.8 rolls of wallpaper (approx 25m²).
5. Leave to dry for one hour before hanging the decoration.
Application Temp. Ideally between 15 – 25°C.
Please Note: The Peel release system can successfully be used with wallpaper, vinyl wallcovering hessian, etc.
Wallcovering can be hung with any traditional paste system. Wash brushes in water.
Brummer Peel Release Coat Pre Decorating Wallpaper Technical Information
Weight: 1.3kg
Barcode: 5010884124346
Shelf-life/Storage: Minimum 12 months when stored in a cool, dry place out of direct sunlight in the original, sealed container. Do not store below +5°C.
Hazards: Irritant. Avoid eye and skin contact. In case of skin or eye contact wash copiously with water. Wear suitable protective glasses and gloves. Keep away from children. Health and Safety Data Sheet
available on request.
Clean-Up: Clean equipment with warm soapy water.
Brummer Peel Release Coat Pre Decorating Wallpaper 1 Litre
Brummer Peel Release Coat Pre Decorating is a revolutionary product which allows wall coverings to be removed from a wall or surface without soaking or scraping. Simply coat the walls with Brummer Peel before you hang your paper and when you redecorate, the old paper pulls off in complete lengths. Ideal for TV, theatre, exhibitions or displays, the paper can be re-used and the panels and displays may also be re-used and the application of Peel avoids all the soaking and scraping normally associated with paper and fabric.
Type: Wax-based water-borne release coat.
Intended Use: For application onto most walls including plaster, plywood, hardboard etc. prior to hanging of wall coverings using normal adhesive systems in order to facilitate the subsequent easy removal of said wall coverings during redecoration without the need for soaking, steaming and scraping.
Special Features: Non-flammable. Low VOC content. Has pale green tint to indicate where Peel has been applied. User friendly. Gives high shear strength bonding of wallcoverings, but relatively low peel strength for easy removal. Enables quick redecoration with significant savings in time and labour costs. May be painted over if such a finish is required in the future
Coverage: Approx 25m² per Litre
Size: 1 Litre
Also Available: Brummer Peel Release Coat Pre Decorating Wallpaper 5 Litre
Brummer Peel Release Coat Pre Decorating Wallpaper Usage Instructions
1. The wall surface must be smooth, clean, sound and completely dry.
2. Mix one and a half to two litres of cold water with contents and stir thoroughly.
3. Apply uniformly to the wall surface, brush well out and avoid going back over the coated area.
4. The diluted mix will cover a wall area equivalent to approx 4.8 rolls of wallpaper (approx 25m²).
5. Leave to dry for one hour before hanging the decoration.
Application Temp. Ideally between 15 – 25°C.
Please Note: The Peel release system can successfully be used with wallpaper, vinyl wallcovering hessian, etc.
Wallcovering can be hung with any traditional paste system. Wash brushes in water.
Brummer Peel Release Coat Pre Decorating Wallpaper Technical Information
Weight: 1.3kg
Barcode: 5010884124346
Shelf-life/Storage: Minimum 12 months when stored in a cool, dry place out of direct sunlight in the original, sealed container. Do not store below +5°C.
Hazards: Irritant. Avoid eye and skin contact. In case of skin or eye contact wash copiously with water. Wear suitable protective glasses and gloves. Keep away from children. Health and Safety Data Sheet
available on request.
Clean-Up: Clean equipment with warm soapy water.