image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Heldite Jointing Compound 125ml

Product Code: HDJC125
£6.99
RRP £10.00 | SAVE £3.01
Item in Stock

Heldite Jointing Compound designed to seal bolted, flanged or screwed pipe joints to prevent leakage in most engineering situations and in plumbing and heating systems. 

Product Features:
Multi-purpose product - Adhesive and sealant
Accurate application - Applied by brush
Anti-corrosive and inert
Aids gasket location
Water resistant

Heldite jointing compound is a high-performance sealant for preventing leakage of Petrol, Diesel Fuel, Hydraulic Fluids, Oils, Paraffin, LPG’s, Water, Steam and Gases in all branches of Automotive, Auto mechanical, Electrical and General Engineering, Plumbing, Heating and Pipeline Services. Heldite is a thick liquid compound that can be applied to any joint either with or without a gasket.

It will effectively seal bolted, flanged or screwed joints and as it is in a liquid form it is economical to use and does not tend to squeeze out into the interior of a joint and cause damage. Heldite is non-abrasive and will not damage highly machined joint faces; the combination of thermal, plastic and adhesive factors in this jointing compound is unique in the sealant formulation. The plasticity combats the effects of temperature and pressure changes, shifting levels and stresses associated with the assembly of dissimilar metals such as aluminium housings bolted to cast blocks. The adhesive factor not only assists gasket location but has been shown to be an effective locking sealant for imparting additional security to splines, studs and press fit bearings.
Being non-abrasive, suitable for use with metals, i.e. steel, aluminium and brass, in combination with dissimilar metals, rubbers etc.
Also waterproof, inert and anti-corrosive. Suitable for use with oils, fuels, hydraulic fluids, non-potable water, gases and coolants.
Unaffected between -40°C to +350 °C. Prevents electrolytic action from the effects of sea water. PASSES COMMERCIAL SPECIFICATION 68-145/I.
Resistant to 18% hydrochloric and 5% sulphuric acids.

Size: 125ml

Preparation
All joints must be completely clean, dry and free from any cleansing agents or loose material prior to application.

Application:
Brush applied

Coats
:
For screwed joints apply one coat to each mating thread and screw up immediately. Otherwise it is possible to build up extra layers as required.

Drying Time:
20 minutes to 8 hours depending on temperature and humidity.

Re-coating Time:
Within one minute or until initial coating becomes tacky depending on temperature and humidity.

Application Temp:
Ideally 15 – 25°C

Coverage:
Approximately 16 squares metres per litre.

Compatability:
Compatible with most metals and rubber. Not suitable for use with pipes carrying potable water or alcohols.

Clean-Up:
Clean equipment and brushes with methylated spirit.

Hazards:
Highly flammable liquid and vapour. Keep away from heat/sparks/open flames and other ignition
sources – no smoking. Keep container tightly closed. Keep away from children.

To download the product safety data sheet (PDF), click HERE

Barcode: 5060174250002

Weight: 0.2kg

Load more reviews

Heldite jointing compound is a high-performance sealant for preventing leakage of Petrol, Diesel Fuel, Hydraulic Fluids, Oils, Paraffin, LPG’s, Water, Steam and Gases in all branches of Automotive, Auto mechanical, Electrical and General Engineering, Plumbing, Heating and Pipeline Services. Heldite is a thick liquid compound that can be applied to any joint either with or without a gasket.

It will effectively seal bolted, flanged or screwed joints and as it is in a liquid form it is economical to use and does not tend to squeeze out into the interior of a joint and cause damage. Heldite is non-abrasive and will not damage highly machined joint faces; the combination of thermal, plastic and adhesive factors in this jointing compound is unique in the sealant formulation. The plasticity combats the effects of temperature and pressure changes, shifting levels and stresses associated with the assembly of dissimilar metals such as aluminium housings bolted to cast blocks. The adhesive factor not only assists gasket location but has been shown to be an effective locking sealant for imparting additional security to splines, studs and press fit bearings.
Being non-abrasive, suitable for use with metals, i.e. steel, aluminium and brass, in combination with dissimilar metals, rubbers etc.
Also waterproof, inert and anti-corrosive. Suitable for use with oils, fuels, hydraulic fluids, non-potable water, gases and coolants.
Unaffected between -40°C to +350 °C. Prevents electrolytic action from the effects of sea water. PASSES COMMERCIAL SPECIFICATION 68-145/I.
Resistant to 18% hydrochloric and 5% sulphuric acids.

Size: 125ml

Preparation
All joints must be completely clean, dry and free from any cleansing agents or loose material prior to application.

Application:
Brush applied

Coats
:
For screwed joints apply one coat to each mating thread and screw up immediately. Otherwise it is possible to build up extra layers as required.

Drying Time:
20 minutes to 8 hours depending on temperature and humidity.

Re-coating Time:
Within one minute or until initial coating becomes tacky depending on temperature and humidity.

Application Temp:
Ideally 15 – 25°C

Coverage:
Approximately 16 squares metres per litre.

Compatability:
Compatible with most metals and rubber. Not suitable for use with pipes carrying potable water or alcohols.

Clean-Up:
Clean equipment and brushes with methylated spirit.

Hazards:
Highly flammable liquid and vapour. Keep away from heat/sparks/open flames and other ignition
sources – no smoking. Keep container tightly closed. Keep away from children.

To download the product safety data sheet (PDF), click HERE

Barcode: 5060174250002

Weight: 0.2kg

Load more reviews

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960