Associated Products
Hotspot Brick and Stone Sealer Protector 500ml
Hotspot Brick and Stone Sealer is a solvent base combination of resins, oils and special compounds formulated for sealing and protecting natural brick and stone.
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
Hotspot Brick and Stone Sealer Protector 500ml
Hotspot Brick and Stone Sealer is a solvent base combination of resins, oils and special compounds formulated for sealing and protecting natural brick and stone but still allows the natural material to breathe.
Hotspot Brick and Stone Sealer will make the surface strongly repellent to oil, water, dirt and dust. Food and drink spillages can be easily removed as they remain on the surface and not absorbed. Enhances the natural beauty of brick and stone, it will slightly deepen the natural colour.
Made in the UK
Size: 500ml
Coverage: Depending on the porosity of the stone 5-8 sq metres per 500ml
To Download the Product Data Sheet (PDF) for Hotspot Brick and Stone Sealer Click HERE
To download the Hotspot Product Brocure (PDF) Click HERE
For a more detailed Hotspot Product Guide (PDF) Click HERE
Hotspot Brick and Stone Sealer Protector Usage Instructions
It is recommended that a small unobtrusive area is tested for suitability prior to complete application. Not suitable for reconstituted stone.
- Ensure surface to be treated is cool
- For best results use Hotspot Fireplace Cleaner to remove any stains.
- It is very important that the surface is thoroughly cleaned of dust with a vacuum to remove all loose dust.
- For the best results use fireplace cleaner to remove any stains.
- Remove screens, fixtures, etc and protect floors and carpets.
- Working area to be well ventilated.
- Wear protective gloves.
- Pour Brick and Stone Sealer into a clean tray or saucer and apply by brush or lint free cloth. (Application by brush may cause streaking.)
- 1 coat should be sufficient for indoors surface coverage but for greater protection outdoors apply 2 or 3 additional coats, ensure that thorough cleaning is achieved again between each coat.
- Leave to dry for 2 – 4 hours between coats, and allow 2-4 hours before use, but where possible leave to dry over night – then heat resistant to 90°C.
Hotspot Brick and Stone Sealer Protector Technical Information
Barcode: 5016564203103
Weight: 0.54kg
To Download the Safety Data Sheet (PDF) for Hotspot Brick and Stone Sealer Protector 500ml Click HERE
Hotspot Brick and Stone Sealer Protector 500ml
Hotspot Brick and Stone Sealer is a solvent base combination of resins, oils and special compounds formulated for sealing and protecting natural brick and stone but still allows the natural material to breathe.
Hotspot Brick and Stone Sealer will make the surface strongly repellent to oil, water, dirt and dust. Food and drink spillages can be easily removed as they remain on the surface and not absorbed. Enhances the natural beauty of brick and stone, it will slightly deepen the natural colour.
Made in the UK
Size: 500ml
Coverage: Depending on the porosity of the stone 5-8 sq metres per 500ml
To Download the Product Data Sheet (PDF) for Hotspot Brick and Stone Sealer Click HERE
To download the Hotspot Product Brocure (PDF) Click HERE
For a more detailed Hotspot Product Guide (PDF) Click HERE
Hotspot Brick and Stone Sealer Protector Usage Instructions
It is recommended that a small unobtrusive area is tested for suitability prior to complete application. Not suitable for reconstituted stone.
- Ensure surface to be treated is cool
- For best results use Hotspot Fireplace Cleaner to remove any stains.
- It is very important that the surface is thoroughly cleaned of dust with a vacuum to remove all loose dust.
- For the best results use fireplace cleaner to remove any stains.
- Remove screens, fixtures, etc and protect floors and carpets.
- Working area to be well ventilated.
- Wear protective gloves.
- Pour Brick and Stone Sealer into a clean tray or saucer and apply by brush or lint free cloth. (Application by brush may cause streaking.)
- 1 coat should be sufficient for indoors surface coverage but for greater protection outdoors apply 2 or 3 additional coats, ensure that thorough cleaning is achieved again between each coat.
- Leave to dry for 2 – 4 hours between coats, and allow 2-4 hours before use, but where possible leave to dry over night – then heat resistant to 90°C.
Hotspot Brick and Stone Sealer Protector Technical Information
Barcode: 5016564203103
Weight: 0.54kg
To Download the Safety Data Sheet (PDF) for Hotspot Brick and Stone Sealer Protector 500ml Click HERE
Associated Products