image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Bonda Marine G4 Primer Sealer 5kg

Product Code: BON12186
£73.99
RRP £80.00 | SAVE £6.01
Item in Stock

Bonda Marine G4 Primer Sealer Performs a vital function as a primer when bonding fibre glass to wood, metal and concrete.


Product Features:
Tough flexible coating
Bonds fibreglass to wood, metal and concrete
Hard wearing, non porous flexible coating
Coverage: 500g/m²

Bonda Marine G4 Primer Sealer 5kg

Bonda Marine G4 Primer Sealer performs a vital function as a primer when bonding fibreglass to wood, metal and concrete. Apply to clean, dry and well prepared surfaces and leave until finger tacky then apply polyester resin and glassfibre.
Also, when applied to wood as a continuous film it forms a non-porous plastic coating which is tough and flexible. Tough yet flexible coating, that is heard wearing. Performs a vital function as a primer when bonding fibre glass to wood, metal and concrete.

Type: A moisture cured single part polyurethane adhesive.
Intended Use:
Performs a vital function as a primer when bonding fibre glass to wood, metal and concrete.
Special Features:
A tough yet flexible coating, that is heard wearing.

To Download the Product Data Sheet (PDF) for Bonda Marine G4 Primer Sealer Click HERE

Coverage: 500g/m²

Size: 5kg
Also Available: Bonda Marine G4 Primer Sealer 500g, Bonda Marine G4 Primer Sealer 1kg and Bonda Marine G4 Primer Sealer 2.5kg

Bonda Marine G4 Primer Sealer Usage Instructions

Preparation: G4 should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed.
Application: Apply by brush or roller.
Coats: After a single coat, apply polyester resin and glass fibre.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp: G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.

Bonda Marine G4 Primer Sealer Technical Information

Barcode: 5014197121863
Weight:
5.1kg

Shelf-life/Storage: Many years if suitably stored unopened in original container. NOTE; this is a moisturehardened product so storage life of opened tins is limited.
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

To Download the prduct safety data sheet (PDF), Click HERE

Load more reviews

Bonda Marine G4 Primer Sealer 5kg

Bonda Marine G4 Primer Sealer performs a vital function as a primer when bonding fibreglass to wood, metal and concrete. Apply to clean, dry and well prepared surfaces and leave until finger tacky then apply polyester resin and glassfibre.
Also, when applied to wood as a continuous film it forms a non-porous plastic coating which is tough and flexible. Tough yet flexible coating, that is heard wearing. Performs a vital function as a primer when bonding fibre glass to wood, metal and concrete.

Type: A moisture cured single part polyurethane adhesive.
Intended Use:
Performs a vital function as a primer when bonding fibre glass to wood, metal and concrete.
Special Features:
A tough yet flexible coating, that is heard wearing.

To Download the Product Data Sheet (PDF) for Bonda Marine G4 Primer Sealer Click HERE

Coverage: 500g/m²

Size: 5kg
Also Available: Bonda Marine G4 Primer Sealer 500g, Bonda Marine G4 Primer Sealer 1kg and Bonda Marine G4 Primer Sealer 2.5kg

Bonda Marine G4 Primer Sealer Usage Instructions

Preparation: G4 should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed.
Application: Apply by brush or roller.
Coats: After a single coat, apply polyester resin and glass fibre.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp: G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.

Bonda Marine G4 Primer Sealer Technical Information

Barcode: 5014197121863
Weight:
5.1kg

Shelf-life/Storage: Many years if suitably stored unopened in original container. NOTE; this is a moisturehardened product so storage life of opened tins is limited.
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

To Download the prduct safety data sheet (PDF), Click HERE

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960