Associated Products
Bonda Marine Wood Seal 500ml
Bonda Marine Wood Seal is a durable, single component polyurethane sealer which can be applied to all woods and concrete to leave a non-porous finish.
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
Bonda Marine Wood Seal 500ml
Bonda Marine Wood Seal is a durable, single component polyurethane sealer which can be applied to all woods and concrete to leave a non-porous finish. A moisture cured single part polyurethane varnish. To be applied for marine use. For wood for a non-porous finish. The coating is tough yet flexible, and has excellent adhesion to many woods, with a high gloss non-yellowing finish.
Coverage: 500ml per m²
Colour: Clear
Size: 500ml
Also Available: Bonda Marine Wood Seal 250ml, Bonda Marine Wood Seal 1 Litre and Bonda Marine Wood Seal 2.5 Litre
Bonda Marine Wood Seal Usage Instructions
Preparation: Should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed.
Application: Apply by brush or roller.
Coats: 3 coats are optimal.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp: Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
Bonda Marine Wood Seal Technical Information
Barcode: 5014197122006
Weight: 0.54kg
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
To Download the product safety data sheet (PDF), Click HERE
Bonda Marine Wood Seal 500ml
Bonda Marine Wood Seal is a durable, single component polyurethane sealer which can be applied to all woods and concrete to leave a non-porous finish. A moisture cured single part polyurethane varnish. To be applied for marine use. For wood for a non-porous finish. The coating is tough yet flexible, and has excellent adhesion to many woods, with a high gloss non-yellowing finish.
Coverage: 500ml per m²
Colour: Clear
Size: 500ml
Also Available: Bonda Marine Wood Seal 250ml, Bonda Marine Wood Seal 1 Litre and Bonda Marine Wood Seal 2.5 Litre
Bonda Marine Wood Seal Usage Instructions
Preparation: Should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed.
Application: Apply by brush or roller.
Coats: 3 coats are optimal.
Drying Time: 60-90 minutes.
Re-coating Time: Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp: Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
Bonda Marine Wood Seal Technical Information
Barcode: 5014197122006
Weight: 0.54kg
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
To Download the product safety data sheet (PDF), Click HERE