Associated Products
Bonda V11 Glassfibre Filler 400g
Bonda V11 Glassfibre Filler is a rapid hardening resilient filler with high glassfibre content providing great strength to repairs.
Bonda V11 Glassfibre Filler is a rapid hardening resilient filler with high glassfibre content providing great strength to repairs.
For repairing rust holes and gaps in metal and is an excellent reinforced filler for fibreglass repairs.
A two-part polyester marine filler reinforced with glass fibres.
To be applied in a marine environment for repairing rust holes and gaps in metal and is an excellent reinforced filler for fibre glass repairs.
A rapidly hardening resilient filler with glass fibre content providing great strength to repairs.
Size: 400g
Preparation:
Should be applied onto a clean and dry substrate.
Application:
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time:
30 mins – 1 hr depending on temperature and humidity.
Clean-Up:
All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Hazards:
Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To download the product safety data sheet (PDF), click HERE
Barcode: 5014197091500
Weight: 0.4kg
Bonda V11 Glassfibre Filler is a rapid hardening resilient filler with high glassfibre content providing great strength to repairs.
For repairing rust holes and gaps in metal and is an excellent reinforced filler for fibreglass repairs.
A two-part polyester marine filler reinforced with glass fibres.
To be applied in a marine environment for repairing rust holes and gaps in metal and is an excellent reinforced filler for fibre glass repairs.
A rapidly hardening resilient filler with glass fibre content providing great strength to repairs.
Size: 400g
Preparation:
Should be applied onto a clean and dry substrate.
Application:
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time:
30 mins – 1 hr depending on temperature and humidity.
Clean-Up:
All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Hazards:
Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To download the product safety data sheet (PDF), click HERE
Barcode: 5014197091500
Weight: 0.4kg
Associated Products