Associated Products
Bonda Marine Wood Seal 1 Litre
Bonda Marine Wood Seal A moisture cured single part polyurethane varnish.
Bonda Marine Wood Seal A durable, single component polyurethane sealer which can be applied to all woods and concrete to leave a non-porous finish.
A moisture cured single part polyurethane varnish.
To be applied for marine use. For wood for a non-porous finish.
The coating is tough yet flexible, and has excellent adhesion to many woods, with a high gloss non-yellowing finish.
Colour: Clear
Size: 1L
Preparation:
Should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other
treatments should be removed.
Application:
Apply by brush or roller.
Coats:
3 coats are optimal.
Drying Time:
60-90 minutes.
Re-coating Time:
Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp:
Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Coverage: 500g/²m
Clean-Up:
Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
Hazards:
Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention.
After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
To Download the product safety data sheet (PDF), Click HERE
Barcode: 5014197122020
Weight: 1.0kg
Bonda Marine Wood Seal A durable, single component polyurethane sealer which can be applied to all woods and concrete to leave a non-porous finish.
A moisture cured single part polyurethane varnish.
To be applied for marine use. For wood for a non-porous finish.
The coating is tough yet flexible, and has excellent adhesion to many woods, with a high gloss non-yellowing finish.
Colour: Clear
Size: 1L
Preparation:
Should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other
treatments should be removed.
Application:
Apply by brush or roller.
Coats:
3 coats are optimal.
Drying Time:
60-90 minutes.
Re-coating Time:
Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp:
Can be applied in poor weather conditions, high humidity and at temperatures down to 0°C.
Coverage: 500g/²m
Clean-Up:
Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
Hazards:
Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention.
After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
To Download the product safety data sheet (PDF), Click HERE
Barcode: 5014197122020
Weight: 1.0kg