
Bonda Decor Fill 7kg
Bonda Decor Fill A two component multi purpose filler for the decorator.
Bonda Decor Fill 7kg
Bonda Decor Fill A two component multi purpose filler for the decorator. Easy to use - hardens rapidly - non tack surface - easy to sand. Fills wood, metal, concrete, GRP.
A two-part polyester filler.
A rapid hardening filler with soft sanding properties that provides a smooth surface.
Bonds strongly to metal, fibre glass, concrete and wood with small filler particle size, to give a fine and dense finish.
Size: 7kg
Bonda Decor Fill Usage Instructions
Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time:30 mins – 1 hr depending on temperature and humidity.
Re-coating Time:Once fully cured and after sanding back, most paints can be applied.
Application Temp:Ideally 15-25°C, but do not use below 10°C.
Compatability:Compatible under all Rustins/Bonda finishes.
Clean-Up:All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Bonda Decor Fill Technical Information
Barcode: 5014197580707
Weight: 7kg
Hazards:
Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To Download the product safety data sheet (PDF), Click HERE
Bonda Decor Fill 7kg
Bonda Decor Fill A two component multi purpose filler for the decorator. Easy to use - hardens rapidly - non tack surface - easy to sand. Fills wood, metal, concrete, GRP.
A two-part polyester filler.
A rapid hardening filler with soft sanding properties that provides a smooth surface.
Bonds strongly to metal, fibre glass, concrete and wood with small filler particle size, to give a fine and dense finish.
Size: 7kg
Bonda Decor Fill Usage Instructions
Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time:30 mins – 1 hr depending on temperature and humidity.
Re-coating Time:Once fully cured and after sanding back, most paints can be applied.
Application Temp:Ideally 15-25°C, but do not use below 10°C.
Compatability:Compatible under all Rustins/Bonda finishes.
Clean-Up:All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Bonda Decor Fill Technical Information
Barcode: 5014197580707
Weight: 7kg
Hazards:
Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To Download the product safety data sheet (PDF), Click HERE