image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Bonda Decor Fill Styrene Free 500g

Product Code: BONDFSF500
£10.39
RRP £10.99 | SAVE £0.60
Item in Stock

Bonda Decor Fill A two component styrene free multi purpose filler for the decorator.

Product Features:
Multi-purpose filler
Easy to use
Hardens rapidly
Non tack surface
Easy to sand

Bonda Decor Fill Styrene Free A two component styrene free multi purpose filler for the decorator. Easy to use - hardens rapidly - non tack surface - easy to sand. Fills wood, metal, concrete, GRP.
A two-part polyester filler.
A rapid hardening filler with soft sanding properties that provides a smooth surface.
Bonds strongly to metal, fibre glass, concrete and wood with small filler particle size, to give a fine and dense finish.

Size: 500g

Preparation
Should be applied onto a clean and dry substrate.

Application

Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.

Curing Time:
30 mins – 1 hr depending on temperature and humidity.

Re-coating Time:
Once fully cured and after sanding back, most paints can be applied.

Application Temp:
Ideally 15-25°C, but do not use below 10°C.

Compatability
:
Compatible under all Rustins/Bonda finishes.

Clean-Up
:
All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.

Hazards:
Harmful by inhalation. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.

To Download the product safety data sheet (PDF), Click HERE

Barcode: 5014197000038

Weight: 0.5kg

Load more reviews

Bonda Decor Fill Styrene Free A two component styrene free multi purpose filler for the decorator. Easy to use - hardens rapidly - non tack surface - easy to sand. Fills wood, metal, concrete, GRP.
A two-part polyester filler.
A rapid hardening filler with soft sanding properties that provides a smooth surface.
Bonds strongly to metal, fibre glass, concrete and wood with small filler particle size, to give a fine and dense finish.

Size: 500g

Preparation
Should be applied onto a clean and dry substrate.

Application

Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.

Curing Time:
30 mins – 1 hr depending on temperature and humidity.

Re-coating Time:
Once fully cured and after sanding back, most paints can be applied.

Application Temp:
Ideally 15-25°C, but do not use below 10°C.

Compatability
:
Compatible under all Rustins/Bonda finishes.

Clean-Up
:
All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.

Hazards:
Harmful by inhalation. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.

To Download the product safety data sheet (PDF), Click HERE

Barcode: 5014197000038

Weight: 0.5kg

Load more reviews

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960