
Associated Products
Bonda Wood Hardener 5 Litre
Bonda Wood Hardener Penetrates deep into rotten wood, forming a hard and tough surface.
I'm sorry, we've sold out
Don't worry, if you enter your email below we'll notify you when it's back in stock!
Bonda Wood Hardener 5 Litre
Bonda Wood Hardener penetrates deep into rotten wood, forming a hard and tough surface. Designed to penetrate deeply into and harden rotten or decayed wood.
Type: A solvent-based moisture-curing reactive polymer solution
Intended Use: Bonda Wood Hardener is designed to penetrate deeply into and harden rotten or decayed wood. Once fully dried, the polymer strengthens and reinforce the deteriorated wood to support the use of wood filler and provide a seal against further moisture penetration.
Special Features: Suitable for interior and exterior use. Optimises the service life of a rotten wood repair and is a costeffective alternative to joinery replacement. Can dry in 2 hours to allow rapid completion of repair work. Easily applied. Deep penetration.
To Download the Product Data Sheet (PDF) for Bonda Wood Hardener Click HERE
Size: 5 Litre
Also Available: Bonda Wood Hardener 500ml
Bonda Wood Hardener Usage Instructions
Preparation: Remove loose, decayed or very soft wood until a fairly sound base is exposed. Bonda Wood Hardener is moisture-hardened, however the wood should be reasonably dry and free from grease, dirt and oil. Drill small holes to aid penetration.
Application: Shake well before use. Apply liberally by brush, saturating the wood. Wait until each coat has been absorbed by the wood and reapply. Ideally this should be done as a continuous process for maximum penetration depending on the absorbency of the wood. Continue with repeated applications until a surface film is formed.
Drying Time: 5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry.
Re-coating Time: 5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry.
Application Temp: Ideally between 15-25ºC. Do not apply below 10ºC.
Compatability: Avoid contact with metal, glass, plastic and painted surfaces
Bonda Wood Hardener Technical Information
Barcode: 5014197480557
Weight: 5.12kg
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
To download product safety data sheet (PDF), Click HERE
Bonda Wood Hardener 5 Litre
Bonda Wood Hardener penetrates deep into rotten wood, forming a hard and tough surface. Designed to penetrate deeply into and harden rotten or decayed wood.
Type: A solvent-based moisture-curing reactive polymer solution
Intended Use: Bonda Wood Hardener is designed to penetrate deeply into and harden rotten or decayed wood. Once fully dried, the polymer strengthens and reinforce the deteriorated wood to support the use of wood filler and provide a seal against further moisture penetration.
Special Features: Suitable for interior and exterior use. Optimises the service life of a rotten wood repair and is a costeffective alternative to joinery replacement. Can dry in 2 hours to allow rapid completion of repair work. Easily applied. Deep penetration.
To Download the Product Data Sheet (PDF) for Bonda Wood Hardener Click HERE
Size: 5 Litre
Also Available: Bonda Wood Hardener 500ml
Bonda Wood Hardener Usage Instructions
Preparation: Remove loose, decayed or very soft wood until a fairly sound base is exposed. Bonda Wood Hardener is moisture-hardened, however the wood should be reasonably dry and free from grease, dirt and oil. Drill small holes to aid penetration.
Application: Shake well before use. Apply liberally by brush, saturating the wood. Wait until each coat has been absorbed by the wood and reapply. Ideally this should be done as a continuous process for maximum penetration depending on the absorbency of the wood. Continue with repeated applications until a surface film is formed.
Drying Time: 5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry.
Re-coating Time: 5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry.
Application Temp: Ideally between 15-25ºC. Do not apply below 10ºC.
Compatability: Avoid contact with metal, glass, plastic and painted surfaces
Bonda Wood Hardener Technical Information
Barcode: 5014197480557
Weight: 5.12kg
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.
Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.
To download product safety data sheet (PDF), Click HERE