image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Bonda Wood Hardener 500ml

Product Code: Bon48005
£7.99
RRP £8.32 | SAVE £0.33
Item in Stock

Bonda Wood Hardener Penetrates deep into rotten wood, forming a hard and tough surface.


Product Features:
Single Pack - Moisture Hardened
Deep Penetration
Easily Applied
Over - Paintable

Bonda Wood Hardener Penetrates deep into rotten wood, forming a hard and tough surface.
A solvent-based moisture-curing reactive polymer solution.
Bonda Wood Hardener
is designed to penetrate deeply into and harden rotten or decayed wood.
Once fully dried, the polymer strengthens and reinforce the deteriorated wood to support the use of wood filler and provide a seal against further moisture penetration.
Suitable for interior and exterior use. Optimises the service life of a rotten wood repair and is a cost-effective alternative to joinery replacement.
Can dry in 2 hours to allow rapid completion of repair work. Easily applied. Deep penetration.


Size: 500ml

Preparation
Remove loose, decayed or very soft wood until a fairly sound base is exposed.
Bonda Wood Hardener is moisture-hardened, however the wood should be reasonably dry and free from grease, dirt and oil. Drill small holes to aid penetration.

Application:
Shake well before use. Apply liberally by brush, saturating the wood. Wait until each coat has been absorbed by the wood and reapply.
Ideally this should be done as a continuous process for maximum penetration depending on the absorbency of the wood.
Continue with repeated applications until a surface film is formed.

Drying Time:
5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry.

Re-coating Time:
5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry.

Application Temp:
Ideally between 15-25ºC. Do not apply below 10ºC.

Compatability:
Avoid contact with metal, glass, plastic and painted surfaces

Clean-Up:
Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.

Hazards
:
Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection.
In case of contact with eyes, immediately rinse with plenty of water and seek medical attention.
After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

To download product safety data sheet (PDF), Click HERE

Barcode: 5014197480052

Weight: 0.5kg

Load more reviews

Bonda Wood Hardener Penetrates deep into rotten wood, forming a hard and tough surface.
A solvent-based moisture-curing reactive polymer solution.
Bonda Wood Hardener
is designed to penetrate deeply into and harden rotten or decayed wood.
Once fully dried, the polymer strengthens and reinforce the deteriorated wood to support the use of wood filler and provide a seal against further moisture penetration.
Suitable for interior and exterior use. Optimises the service life of a rotten wood repair and is a cost-effective alternative to joinery replacement.
Can dry in 2 hours to allow rapid completion of repair work. Easily applied. Deep penetration.


Size: 500ml

Preparation
Remove loose, decayed or very soft wood until a fairly sound base is exposed.
Bonda Wood Hardener is moisture-hardened, however the wood should be reasonably dry and free from grease, dirt and oil. Drill small holes to aid penetration.

Application:
Shake well before use. Apply liberally by brush, saturating the wood. Wait until each coat has been absorbed by the wood and reapply.
Ideally this should be done as a continuous process for maximum penetration depending on the absorbency of the wood.
Continue with repeated applications until a surface film is formed.

Drying Time:
5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry.

Re-coating Time:
5 minutes, (see above). Allow a minimum of 2 hours before applying wood filler over Bonda Wood Hardener or until hardener film becomes fairly touch-dry.

Application Temp:
Ideally between 15-25ºC. Do not apply below 10ºC.

Compatability:
Avoid contact with metal, glass, plastic and painted surfaces

Clean-Up:
Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.

Hazards
:
Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection.
In case of contact with eyes, immediately rinse with plenty of water and seek medical attention.
After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

To download product safety data sheet (PDF), Click HERE

Barcode: 5014197480052

Weight: 0.5kg

Load more reviews

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960