Bonda Woodfill Beech 500g

Bonda Woodfill Beech is an superior two component rapid hardening wood filler. Easy to mix and apply and is used to fill knots in timber, pin holes, defects etc. Sands well to give a excellent base for finishing. A two-part polyester filler. Easy to sand and tack free.

Colour: Beech
To see the Full Range of Bonda Woodill Shades Click HERE

Size: 500g
Also Available Bonda Woodfill Beech 1.5kg

Bonda Woodfill Beech Usage Instructions

Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.

Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Application Temp: Ideally 15-25°C, but do not use below 10°C.

Clean-Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.

Bonda Woodfill Beech Technical Information

Barcode: 5014197183045

Weight: 0.6kg

Hazards: Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.

To download the product safety data sheet (PDF), Click HERE