image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Liberon Boiled Linseed Oil 250ml

Product Code: 014627
£5.49
RRP £5.95 | SAVE £0.46
Item in Stock

Liberon Boiled Linseed Oil is use used to give a mellow, patinated finish to new or stripped bare wood.

Product Features:
Superior quality oil, similar to Raw Linseed, but has had hot air passed through to improve drying
Ideal for use with all types of wood (expect exterior oak)
Provides a traditional hard wearing finish
Traditional sealer for terracotta and stone floors
Coverage: 8-10m² per Litre

Liberon Boiled Linseed Oil is use used to give a mellow, patinated finish to new or stripped bare wood. A superior quality oil, similar to Raw Linseed, but having had hot air passed through to improve drying times, it is suitable for use on all types of wood, except exterior oak. It is also recommended as a sealer for terracotta tiles and other porous surfaces before waxing. 

Liberon Boiled Linseed Oil gives a mellow and patinated finish to new or stripped bare wood.

+ Superior quality oil, similar to Raw Linseed, but has had hot air passed through to improve drying times
+ Ideal for use with all types of wood (expect exterior oak)
+ Provides a traditional hard wearing finish
+ Traditional sealer for terracotta and stone floors

Coverage: 8-10m² per Litre

Size: 250ml

Also Available in 500ml1 Litre and 5 Litre

Preparation: 
Ensure that the surface to be treated is clean and dry. Any previous finish must be thoroughly removed before using Boiled Linseed Oil. 

Application:
Ready to use. For ease of application dilute the first few coats with Liberon Pure Turpentine (up to 30%). Rub well into the wood using a lint free cotton cloth. After about 20 minutes, wipe off the excess with a clean lint-free cloth. Failure to do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at 24 hour intervals. Apply a final coat of Boiled Linseed Oil, again wiping off any excess. Allow this final coat to harden for a few days before use. A light rubbing in between coats with Liberon Ultra Fine Steel Wool (0000) will improve results. If the surface becomes damaged, work in a new coat.
Important
Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. 

Cleaning and maintenance:
Wipe surface with a damp cloth and buff dry. Re-oil as and when required depending upon usage. 

Barcode: 5022640000788
Weight:
0.29kg

PRECAUTIONS:
Store Liberon Boiled Linseed Oil at a temperature above 5 °C. Always replace the lid otherwise the oil can deteriorate.
Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard.
If the excess is not removed and the surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.

Load more reviews

Liberon Boiled Linseed Oil is use used to give a mellow, patinated finish to new or stripped bare wood. A superior quality oil, similar to Raw Linseed, but having had hot air passed through to improve drying times, it is suitable for use on all types of wood, except exterior oak. It is also recommended as a sealer for terracotta tiles and other porous surfaces before waxing. 

Liberon Boiled Linseed Oil gives a mellow and patinated finish to new or stripped bare wood.

+ Superior quality oil, similar to Raw Linseed, but has had hot air passed through to improve drying times
+ Ideal for use with all types of wood (expect exterior oak)
+ Provides a traditional hard wearing finish
+ Traditional sealer for terracotta and stone floors

Coverage: 8-10m² per Litre

Size: 250ml

Also Available in 500ml1 Litre and 5 Litre

Preparation: 
Ensure that the surface to be treated is clean and dry. Any previous finish must be thoroughly removed before using Boiled Linseed Oil. 

Application:
Ready to use. For ease of application dilute the first few coats with Liberon Pure Turpentine (up to 30%). Rub well into the wood using a lint free cotton cloth. After about 20 minutes, wipe off the excess with a clean lint-free cloth. Failure to do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at 24 hour intervals. Apply a final coat of Boiled Linseed Oil, again wiping off any excess. Allow this final coat to harden for a few days before use. A light rubbing in between coats with Liberon Ultra Fine Steel Wool (0000) will improve results. If the surface becomes damaged, work in a new coat.
Important
Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. 

Cleaning and maintenance:
Wipe surface with a damp cloth and buff dry. Re-oil as and when required depending upon usage. 

Barcode: 5022640000788
Weight:
0.29kg

PRECAUTIONS:
Store Liberon Boiled Linseed Oil at a temperature above 5 °C. Always replace the lid otherwise the oil can deteriorate.
Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard.
If the excess is not removed and the surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.

Load more reviews

Associated Products


image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960