image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Liberon Raw Linseed Oil 250ml

Product Code: 014621
£4.95
RRP £6.00 | SAVE £1.05
Item out of Stock
The original oil polish with a tradition going back many centuries, Raw Linseed Oil is a hard wearing oil giving a mellow, patinated finish.
Product Features:
The original, traditional oil finish
For use on hard or close grained wood
Can be added to other oils to make unique blends
Traditional lubricant used in French Polishing
EN71 Approved - safe for toys

I'm sorry, we've sold out

Don't worry, if you enter your email below we'll notify you when it's back in stock!

The original oil polish with a tradition going back many centuries, Raw Linseed Oil is a hard wearing oil giving a mellow, patinated finish. It is ideal for oiling cricket bats and can be added to other oils to make unique blends.

Liberon Raw Linseed Oil is a traditional oil for nourishing and protecting wood.

+ The original, traditional oil finish
+ For use on hard or close grained wood
+ Ideal for oiling cricket bats
+ Can be added to other oils to make unique blends
+ Traditional lubricant used in French Polishing
+ Add to putty to keep it soft
+ EN71 Approved - safe for toys


250ml

Preparation 
Ensure the surface to be treated is clean and dry. Any previous finish must be thoroughly removed before using Raw Linseed Oil. 

Application
Ready to use. For ease of application dilute the first few coats with Liberon Pure Turpentine (up to 30%), or alternatively heat the Raw Linseed Oil by placing it in a container and standing it in a bowl of hot water that can be frequently renewed. 
If heating the Raw Linseed Oil, DO NOT dilute with turpentine. Rub well into the wood using a lint-free cotton cloth. After about 20-30 minutes, wipe off the excess with a clean lint-free cloth. Failure to do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at a few days interval. 
Apply a final coat of undiluted Raw Linseed Oil, again wiping off any excess. Allow this final coat to harden for a few days before use. A minimum of three coats is recommended. A light rubbing in between coats with Liberon Ultra Fine Steel Wool (0000) will improve results. If the surface becomes damaged, work in a new coat.

Important

Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. 

Cleaning and maintenance

Wipe surface with a damp cloth and buff dry. Re-oil as and when required, depending upon usage. 

Precautions
Store Liberon Raw Linseed Oil at a temperature above 5 °C. Always replace the lid otherwise the oil can deteriorate.
Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard.
If the excess is not removed and surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.

Barcode: 5022640000771
Weight: 0.29kg

Load more reviews

The original oil polish with a tradition going back many centuries, Raw Linseed Oil is a hard wearing oil giving a mellow, patinated finish. It is ideal for oiling cricket bats and can be added to other oils to make unique blends.

Liberon Raw Linseed Oil is a traditional oil for nourishing and protecting wood.

+ The original, traditional oil finish
+ For use on hard or close grained wood
+ Ideal for oiling cricket bats
+ Can be added to other oils to make unique blends
+ Traditional lubricant used in French Polishing
+ Add to putty to keep it soft
+ EN71 Approved - safe for toys


250ml

Preparation 
Ensure the surface to be treated is clean and dry. Any previous finish must be thoroughly removed before using Raw Linseed Oil. 

Application
Ready to use. For ease of application dilute the first few coats with Liberon Pure Turpentine (up to 30%), or alternatively heat the Raw Linseed Oil by placing it in a container and standing it in a bowl of hot water that can be frequently renewed. 
If heating the Raw Linseed Oil, DO NOT dilute with turpentine. Rub well into the wood using a lint-free cotton cloth. After about 20-30 minutes, wipe off the excess with a clean lint-free cloth. Failure to do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at a few days interval. 
Apply a final coat of undiluted Raw Linseed Oil, again wiping off any excess. Allow this final coat to harden for a few days before use. A minimum of three coats is recommended. A light rubbing in between coats with Liberon Ultra Fine Steel Wool (0000) will improve results. If the surface becomes damaged, work in a new coat.

Important

Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. 

Cleaning and maintenance

Wipe surface with a damp cloth and buff dry. Re-oil as and when required, depending upon usage. 

Precautions
Store Liberon Raw Linseed Oil at a temperature above 5 °C. Always replace the lid otherwise the oil can deteriorate.
Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat outside to dry to avoid a fire hazard.
If the excess is not removed and surface becomes sticky, wipe with white spirit to remove the sticky film and allow to dry before continuing.

Barcode: 5022640000771
Weight: 0.29kg

Load more reviews

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960