Bartoline TX10 Paint and Varnish Stripper 500ml
Bartoline TX10 Paint and Varnish Stripper is an extremely effective non-Methylene Chloride paint stripper.
Bartoline TX10 Paint and Varnish Stripper is a highly effective non-Methylene Chloride stripper ideal for use by inexperienced DIYers as well as professional users.
The non-caustic formulation is quick and easy to use, both indoors and out, and can remove multiple layers at a time.
Suitable for use on wood, metal, glass, plaster and concrete.
May not be used on plastics.
Also suitable for removing old hardened paint from paint brushes, rollers and tools.
Size: 500ml
To download the safety datasheet (PDF), click HERE
Directions For use:
Preparation
Read label fully before use.
Wear protective gloves.
Protect floor coverings, textiles
and vinyl materials.
Shake container well before use.
Application
Pour a quantity of Bartoline TX10 Paint and Varnish Stripper into a suitable
container.
Apply a generous, thick even coat (do not brush out) at a rate of 1 litre per
square metre, onto the surface to be stripped, with a suitable brush.
Leave for
approximately 1 hour and apply a second coat.
For areas where there are less than 5
layers of paint or varnish, a second coat may not be necessary.
Once the stripper has
softened the paint, scrape off, leaving surface as clean as possible.
Repeat process if
necessary.
Rub down stripped area using a scrubbing brush or stainless steel pad (DO
NOT USE WIRE WOOL).
Wash down stripped area with Bartoline Clean Spirit or
detergent and water.
Rinse with clean water and allow to dry.
Coverage
1 litre of TX10 Paint Stripper is sufficient to strip a surface area of approximately 1
square metre.
Barcode: 5010789878757
Weight: 550g
Bartoline TX10 Paint and Varnish Stripper is a highly effective non-Methylene Chloride stripper ideal for use by inexperienced DIYers as well as professional users.
The non-caustic formulation is quick and easy to use, both indoors and out, and can remove multiple layers at a time.
Suitable for use on wood, metal, glass, plaster and concrete.
May not be used on plastics.
Also suitable for removing old hardened paint from paint brushes, rollers and tools.
Size: 500ml
To download the safety datasheet (PDF), click HERE
Directions For use:
Preparation
Read label fully before use.
Wear protective gloves.
Protect floor coverings, textiles
and vinyl materials.
Shake container well before use.
Application
Pour a quantity of Bartoline TX10 Paint and Varnish Stripper into a suitable
container.
Apply a generous, thick even coat (do not brush out) at a rate of 1 litre per
square metre, onto the surface to be stripped, with a suitable brush.
Leave for
approximately 1 hour and apply a second coat.
For areas where there are less than 5
layers of paint or varnish, a second coat may not be necessary.
Once the stripper has
softened the paint, scrape off, leaving surface as clean as possible.
Repeat process if
necessary.
Rub down stripped area using a scrubbing brush or stainless steel pad (DO
NOT USE WIRE WOOL).
Wash down stripped area with Bartoline Clean Spirit or
detergent and water.
Rinse with clean water and allow to dry.
Coverage
1 litre of TX10 Paint Stripper is sufficient to strip a surface area of approximately 1
square metre.
Barcode: 5010789878757
Weight: 550g