Bonda Bilge Cleaner 1 Litre Usage Instructions

Application: Pour Bonda Bilge Cleaner into any shallow accumulation of water between floorboards. Add most in the area around the pump well. Clear all limber holes. 
Leave Bonda Bilge Cleaner in the water whilst underway, then pump out in the usual manner. If the boat is motionless, add Bonda Bilge Cleaner and stir Bilge water.
Rub down bilges with a brush if the bilge is particularly dirty. 
For surfaces not touched by bilge water, add a little Bonda Bilge Cleaner to a bucket of water and apply a sponge, rag or cloth. 
For cleaning oil stains and grease from paintwork or traffic film from cars, add a little Bonda Bilge Cleaner to the cleaning water.

Application Temp: Optimum temperature 15 – 25 degrees Centigrade.

Coverage: 100 ml of product to 25 litres of sea or inland water is enough to treat a 30 ft. yacht.

Compatibility: In its highly water-diluted form, (i.e., 1 part Bonda Bilge Cleaner: 250 parts water), may be used on car paintwork to remove oil, grease and traffic film.

Hazards:
Contains (C9-11) alkyl alcohol ethoxylate. Causes serious eye damage. Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Immediately call a POISON Centre/doctor. Dispose of content/container in accordance with local regulations.

Ingredients (Regulations 648/2004 EC on detergents). Less than 5% cationic
surfactants.30% or more – Non-Ionic Surfactants. Note: The use of Bonda Bilge Cleaner does not
relieve the user of obligations under the River, Canal or Harbour Regulations.

Bonda Bilge Cleaner 1 Litre Technical Information

Barcode: 5015332004287

Weight: 1.01kg
To download the safety data sheet (PDF) for Bonda Bilge Cleaner Click HERE