Bonda Decor Fill Styrene Free 500g

Preparation: 
Should be applied onto a clean and dry substrate.

Application: 
Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.
Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.

Curing Time:
30 mins – 1 hr depending on temperature and humidity.

Re-coating Time:
Once fully cured and after sanding back, most paints can be applied.

Application Temp:
Ideally 15-25°C, but do not use below 10°C.

Compatability:
Compatible under all Rustins/Bonda finishes.

Clean-Up:
All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.

Hazards:
Harmful by inhalation. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.

To Download the product safety data sheet (PDF), Click HERE

Barcode: 5014197000038

Weight: 0.5kg