image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Bonda FEW Fine Surface Filler 1.5kg

Product Code: BON09136
£20.49
RRP £22.08 | SAVE £1.59
Item out of Stock

Bonda FEW Fine Surface Filler a very fine particle filler intended for surfacing work on metal, GRP, plywood and other fillers, prior to spraying.


Product Features:
Very fine particle filler
Primarily used for surfacing work on other fillers
Normally requires no primer before topcoat application
Takes all types of paint
Highly popular in the marine industry

I'm sorry, we've sold out

Don't worry, if you enter your email below we'll notify you when it's back in stock!

Bonda FEW Fine Surface Filler 1.5kg

Bonda FEW Fine Surface Filler is a very fine particle filler intended for surfacing work on metal, GRP, plywood and other fillers, prior to spraying. The filler is white in colour and the hardener is red to aid mixing. The final colour being slightly tinted white. The dense finish generally requires no priming prior to topcoat application making a great choice for final imperfections. A two-part polyester marine filler. Used in the marine environment for surfacing metal, fibre glass, plywood and other fillers, prior to spraying.

The dense finish requires no priming prior to top coat application, making a great choice for final imperfections. Takes all types of paint and easy to sand.

Size
: 1.5kg
Also Available: Bonda FEW Fine Surface Filler 500g and Bonda FEW Fine Surface Filler 4kg

Bonda FEW Fine Surface Filler Usage Instructions

Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.Mix thoroughly until an even colour is obtained.Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Re-Coating Time
: Once fully cured and after sanding back, most paints can be applied.
Clean-Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.



Bonda FEW Fine Surface Filler Technical Information

Barcode: 5014197091364
Weight: 1.5kg

Hazards:Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection

To download the product safety data sheet (PDF), Click HERE

Load more reviews

Bonda FEW Fine Surface Filler 1.5kg

Bonda FEW Fine Surface Filler is a very fine particle filler intended for surfacing work on metal, GRP, plywood and other fillers, prior to spraying. The filler is white in colour and the hardener is red to aid mixing. The final colour being slightly tinted white. The dense finish generally requires no priming prior to topcoat application making a great choice for final imperfections. A two-part polyester marine filler. Used in the marine environment for surfacing metal, fibre glass, plywood and other fillers, prior to spraying.

The dense finish requires no priming prior to top coat application, making a great choice for final imperfections. Takes all types of paint and easy to sand.

Size
: 1.5kg
Also Available: Bonda FEW Fine Surface Filler 500g and Bonda FEW Fine Surface Filler 4kg

Bonda FEW Fine Surface Filler Usage Instructions

Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio.Mix thoroughly until an even colour is obtained.Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Re-Coating Time
: Once fully cured and after sanding back, most paints can be applied.
Clean-Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.



Bonda FEW Fine Surface Filler Technical Information

Barcode: 5014197091364
Weight: 1.5kg

Hazards:Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection

To download the product safety data sheet (PDF), Click HERE

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960