Bonda Filler Usage Instructions

Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Clean Up:  All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.

Bonda Filler Technical Information

Barcode: 5014197091029
Weight: 1.5kg

Hazards: Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.

To download product safety data sheet (PDF) click HERE