Bonda G4 Damp Seal Usage Instructions

Preparation: G4 should be applied onto a bare, clean and dry substrate. Existing coatings, paint or other treatments should be removed. Any loose pointing in brick work should be replaced or worn areas in floors repaired.
Application:Apply by brush or roller.
Coats:For most sealing purposes 3 coats are recommended.
Drying Time:60-90 minutes.
Re-coating Time:Each coat can be reapplied when the surface is finger tacky. Do not allow 4 hours to elapse between coats.
Application Temp:G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0°C. Withstands temperatures up to 200ºC with good chemical resistance
Clean-Up: Clean equipment with Rustins Cellulose Thinners. Turpentine or White Spirit are unsuitable.

Bonda G4 Damp Seal Technical Information

Barcode: 50141971210061
Weight: 5.14kg

Hazards: Flammable. Irritant. Avoid contact with eyes and skin. Wear protective gloves and eye protection. In case of contact with eyes, immediately rinse with plenty of water and seek medical attention. After contact with skin, wash immediately with soap and water or a suitable skin cleanser. Keep out of reach of children. Avoid ignition sources. Do not spray. Do not inhale vapour.

To download product safety data sheet (PDF) for Bonda G4 Damp Seal Click HERE