Bonda Seal Clear Usage Instructions

Surface Preparation: The surface should be dry to enable maximum penetration.
Application: Brush apply in thin coats. Unless sanding between coats, apply each coat while the previous coat in finger tacky, normally 30-90 minutes. if left to harden sand surface in between coats.
For Wood: Dense, Oily or closely grained woods do not allow deep penetration and should be well sanded. for smooth surfaces sand in between coats.
Wood, Cork and Lino Floors: New floors can be protected and old floors given a new look, it is important that the floor has stabilised before application. The first coat should be thinned and all traces of wax removed.
Sealing Brick – Concrete: Loose cement, plaster, flaking brick or old paint should be removed. It is not recommended for dense surfaces such as quarry tiles. For damp coating 3 coats are normally required.
Hardening Times: The coating hardens to a tack free surface within 4 hours and can be handled and walked n after 6 hours. Full Mechanical hardness is 24 hours and chemical resistance is 72 hours

Bonda Seal Clear Technical Information

Barcode: 5014197121542
Weight: 1.09kg