image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Bonda Woodfill Redwood 4kg

Product Code: BON18440
£43.69
RRP £45.83 | SAVE £2.14
Item out of Stock

Bonda Woodfill Redwood is an superior two component rapid hardening wood filler.

Product Features:
Superior two component rapid hardening wood filler
Easy to mix and apply
Sands well to give an excellent base for finishing
Use to fill knots in timber, pin holes, defects etc

I'm sorry, we've sold out

Don't worry, if you enter your email below we'll notify you when it's back in stock!

Bonda Woodfill Redwood 4kg

Bonda Woodfill Redwood is an superior two component rapid hardening wood filler. It is easy to mix and apply and is used to fill knots in timber, pin holes, defects etc. Sands well to give a excellent base for finishing.

Type: A two-part polyester filler. Easy to mix and apply and is used fill knots in timber, pin holes, defects etc. Easy to sand and tack free.

To Download the Product Data Sheet (PDF) for Bond Woodfill Click HERE

Colour: Redwood
Also Available in Oak, Teak, Mahogany, Beech, Ash, White, Pine, Ash and Ebony.

Size: 4kg
Also Available: Bonda Woodfill Redwood 500g and Bonda Woodfill Redwood 1.5kg

Bonda Woodfill Redwood Usage Instructions

Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Application Temp
: Ideally 15-25°C, but do not use below 10°C.
Clean-Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.

Bonda Woodfill Redwood Technical Information

Barcode: 5014197184400
Weight:
4.12kg

Hazards: Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.

To download the product safety data sheet (PDF), Click HERE

Load more reviews

Bonda Woodfill Redwood 4kg

Bonda Woodfill Redwood is an superior two component rapid hardening wood filler. It is easy to mix and apply and is used to fill knots in timber, pin holes, defects etc. Sands well to give a excellent base for finishing.

Type: A two-part polyester filler. Easy to mix and apply and is used fill knots in timber, pin holes, defects etc. Easy to sand and tack free.

To Download the Product Data Sheet (PDF) for Bond Woodfill Click HERE

Colour: Redwood
Also Available in Oak, Teak, Mahogany, Beech, Ash, White, Pine, Ash and Ebony.

Size: 4kg
Also Available: Bonda Woodfill Redwood 500g and Bonda Woodfill Redwood 1.5kg

Bonda Woodfill Redwood Usage Instructions

Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Application Temp
: Ideally 15-25°C, but do not use below 10°C.
Clean-Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.

Bonda Woodfill Redwood Technical Information

Barcode: 5014197184400
Weight:
4.12kg

Hazards: Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.

To download the product safety data sheet (PDF), Click HERE

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960