Bonda Woodfill Teak 1.5kg

Name: Bonda Woodfill Teak 1.5kg
SKU: BON18115
Availability: InStock

Product Code: BON18115

Ask a question
about this product

£19.00 inc. VAT

£15.83 ex. VAT

RRP ~~£20.16~~ | SAVE £1.16RRP ~~£16.80~~ | SAVE £0.97

Bonda Woodfill Teak is a superior two component rapid hardening wood filler used fill knots in timber, pin holes, defects etc.

Product Features
- Superior two component rapid hardening wood filler
- Easy to mix and apply
- Sands well to give an excellent base for finishing
- Use to fill knots in timber
- pin holes
- defects etc
- Made in the UK
Description
Bonda Woodfill Teak 1.5kg
Bonda Woodfill Teak is an superior two component rapid hardening wood filler. Easy to mix and apply and is used to fill knots in timber, pin holes, defects etc. It sands well to give a excellent base for finishing.
Type: A two-part polyester filler.
Intended Use: Easy to mix and apply and is used fill knots in timber, pin holes, defects etc. Easy to sand and tack free.
To Download the Product Data Sheet (PDF) for Bond Woodfill Click HERE
Colour: Teak
To See the Full Range of Bonda Woodfill Click HERE
Size: 1.5kg
Also Available: Bonda Woodfill Teak 500g
How to use
Bonda Woodfill Teak Usage Instructions
Preparation: Should be applied onto a clean and dry substrate.
Application: Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio. Mix thoroughly until an even colour is obtained. Do not prepare more than is required as any excess will be unusable after 10 mins.
Curing Time: 30 mins – 1 hr depending on temperature and humidity.
Application Temp: Ideally 15-25°C, but do not use below 10°C.
Clean-Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Technical Information
Bonda Woodfill Teak Technical Information
Barcode: 501419718115
Weight: 1.52kg

Shelf-life/Storage: 18 months if stored under the recommended conditions. Store in cool and dry place below 25°C.
Hazards: Harmful by inhalation. Contains Styrene. Do not breathe vapours. Wear suitable protective gloves and eye/face protection.
To download the product safety data sheet (PDF) for Bonda Woodfill Click HERE
Product Reviews