Briwax Hard Wax Oil Clear Satin 2.5 Litre

Briwax Hard Wax Oil Clear Satin Usage Instructions

Intended Use: Bare wood, hardboard, MDF, unsealed cork, concrete, stone, unsealed quarry and terracotta tiles. Interior use only.
Preparation: The surface must be clean, smooth, dry and free from wax, dust and contaminants. Read the full instructions on the tin. Nail holes and small cracks may be filled with Rustins wood Fillers. Bare wood may be dyed before coating with Briwax Wood Dye. Other brands of dye, stain or paints may be incompatible. Do not apply Knotting or Sanding Sealer.
Application: Using a lint-free cloth, synthetic brush or varnish roller, apply evenly and liberally, finishing in the direction of the grain and wiping off the excess.
Coats Apply 3 coats according to the coverage rate. More absorbent surfaces or commercial premises may require 4 coats. Important: If there is any grain raising after the 1st coat has dried, lightly sand the surface smooth before applying the next coat.
Drying Time: Typically 2 hours for oil to be completely absorbed
Application Temp: Ideally between 15-25°C. Do not apply below 10°C
Coverage: Approx. 20-30m² per litre depending on the absorbency of the wood
Maintenance Periodic re-oiling is required. Clean the surface before refinishing using warm water and mild detergent
Settlement Stir well before use.
Shelf-life/Storage Many years in original sealed packaging if stored in cool, dry conditions.

Briwax Hard Wax Oil Clear Satin Technical Information

Barcode: 5015332000647
Weight: 3.25kg