image

100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Associated Products

Briwax Toluene Free Wax Polish Jacobean (181) 370g

Product Code: BW0601280321
£15.29
RRP £18.12 | SAVE £2.83
Item in Stock

Briwax Original Wax Polish Jacobean is formulated with fast drying, stronger solvents which speed up drying, and also increase the cleaning ability of the wax slightly. 

Product Features:
Easy to apply and buff
Gives a long lasting Satin sheen
Rapid drying
Can be applied directly to timber
Revives the natural colour of wood and enriches the patina

Briwax Toluene Free Wax Polish Jacobean has been blended with slightly milder solvents, so that it gives off less odour whilst drying, whilst at the same time providing a smooth application and finish. The film remains as a paste for slightly longer than Briwax Original to aid the even application and will leave you with the deep grain enriching Briwax shine.

Intended Use: Suitable for use on most wooden surfaces. This product is not recommended for use in areas where it will come into contact with water.

Shade: Jacobean

Size: 370g

To Download the Product Information Sheet Click HERE

Preparation: The surface must be smooth, clean and dry. Briwax may be used on previously waxed surfaces. For best results, clean surface first with Briwax Furniture Cleaner.
Application: Apply using a lint free cloth or Briwax 0000 Steel Wool, thoroughly working the wax into the grain. When dry buff to desired finish with a soft clean cloth. Note; best results are obtained if the wood has previously been coated with Briwax Shellac Sanding Sealer.
Coats: One coat is usually sufficient, but a second coat may be applied to obtain a higher sheen.
Drying Time: Quick drying. Re-coating Time: If required, re-apply after a few minutes.
Application Temp: Ideally 15-25ºC.
Maintenance: Re-apply as required.
Compatibility: Compatible with all types of wood finishes. If in doubt or when waxing antiques or pre-finished furniture, check compatibility first. For best results and to prevent a blotchy appearance on porous woods, seal untreated surface with a varnish, finishing oil or sanding sealer.
Clean-Up: Hands and application cloth may be cleaned in warm soapy water

Barcode: 5015277169522
Weight: 0.39kg

Above 20°C, Briwax will soften and liquify. Replace lid, put in a cool place and it will return to its original state.

Shelf-life/Storage: A very long time, if stored in the original sealed container in a cool dry place.
Hazards: Flammable. Keep out of reach of children. Keep Container tightly closed. Keep away from all sources of ignition. No smoking.

To Download the Safety Data Sheet (PDF) for Briwax Toluene Free Wax Polish Click HERE

Load more reviews

Briwax Toluene Free Wax Polish Jacobean has been blended with slightly milder solvents, so that it gives off less odour whilst drying, whilst at the same time providing a smooth application and finish. The film remains as a paste for slightly longer than Briwax Original to aid the even application and will leave you with the deep grain enriching Briwax shine.

Intended Use: Suitable for use on most wooden surfaces. This product is not recommended for use in areas where it will come into contact with water.

Shade: Jacobean

Size: 370g

To Download the Product Information Sheet Click HERE

Preparation: The surface must be smooth, clean and dry. Briwax may be used on previously waxed surfaces. For best results, clean surface first with Briwax Furniture Cleaner.
Application: Apply using a lint free cloth or Briwax 0000 Steel Wool, thoroughly working the wax into the grain. When dry buff to desired finish with a soft clean cloth. Note; best results are obtained if the wood has previously been coated with Briwax Shellac Sanding Sealer.
Coats: One coat is usually sufficient, but a second coat may be applied to obtain a higher sheen.
Drying Time: Quick drying. Re-coating Time: If required, re-apply after a few minutes.
Application Temp: Ideally 15-25ºC.
Maintenance: Re-apply as required.
Compatibility: Compatible with all types of wood finishes. If in doubt or when waxing antiques or pre-finished furniture, check compatibility first. For best results and to prevent a blotchy appearance on porous woods, seal untreated surface with a varnish, finishing oil or sanding sealer.
Clean-Up: Hands and application cloth may be cleaned in warm soapy water

Barcode: 5015277169522
Weight: 0.39kg

Above 20°C, Briwax will soften and liquify. Replace lid, put in a cool place and it will return to its original state.

Shelf-life/Storage: A very long time, if stored in the original sealed container in a cool dry place.
Hazards: Flammable. Keep out of reach of children. Keep Container tightly closed. Keep away from all sources of ignition. No smoking.

To Download the Safety Data Sheet (PDF) for Briwax Toluene Free Wax Polish Click HERE

Load more reviews

Associated Products


100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960