Colron Wax Remover Instructions

Removing the finish back to the bare wood:

1. Wearing suitable gloves, pour a small amount of the liquid into a wide mouthed jar and dip a small piece of Medium grade (Grade 000) Steel Wool into the liquid.
2. Start rubbing a generous amount in the direction of the grain working on about 1 sq foot at a time. The finish will become ‘sticky’ and dirty as it dissolves the old finish.
3. Keep applying more liquid, rubbing gently.
4. When the finish is fully dissolved, wipe it off with a clean cloth.
5. Now take a clean piece of Medium grade (grade 000) steel wool dipped in fresh Colron Wax Remover, and wipe over the entire surface to remove lap marks.
6. Leave to dry thoroughly, and finish off by rubbing briskly with clean dry Medium grade (grade 000) steel wool.
7. Remove the dust with a clean cloth and you are ready to apply a finish.

Removing wax and oil build up, leaving the old finish intact:

To remove a build up of old wax or oil from a sound varnished or French polished surface without stripping back to the bare wood, follow these directions.

1. Apply the liquid to a clean cloth or to fine grade (Grade 0000) steel wool.
2. Rub soaked cloth or steel wool gently over the surface. The old wax and oil will now dissolve away.
3. Wipe off with a clean cloth leaving the surface finish intact.

Barcode: 5010214525805

Weight: 3.01kg