Dr Beckmann Carpet Stain Remover with Applicator Brush Usage Instructions

1. Before first use, unscrew the brush head, pierce a SMALL hole in the seal about 2mm in diameter (Do not remove the seal).
2. Screw the brush head on again, taking care not to over tighten.
3. Remove loose dirt and blot spill from the stained area.
4. Then shake bottle before use and squeeze gently to moisten the applicator brush.
5. Apply by holding the bottle so the applicator id flat against the soiled area – do not soak, let the foam do the work.
6. Leave for 3 minutes and then with a damp white cloth, gently remove all residues of the stain and the solution.
7. Heavy soiling may need a second application.
8. Rinse applicator after every use. Store bottle upright.

Dr Beckmann Carpet Stain Remover with Applicator Brush Technical Information

Barcode: 5010287314504
Weight: 0.82kg

Important Information
Always test for compatibility prior to use by applying a small amount of the product to an inconspicuous area of the capret/upholstery and then leave for 30 minutes.
Remove all residues of the product using a moist white cloth and allow the test area to dry completely.
If the test area remains unchanged proceed with stain removal.
Always follow care label instructions for carpet and upholstery.
Do not over saturate stained area as this could lead to fibre damage.
Do not use on leather, suede, silk, velvet or any fabric which can be damaged by water alone.
Certain stains can cause permanent discolouration which cannot be treated.