Everbuild Silweld Self Fusing Silicone Repair Black 3m
Everbuild Silweld Self Fusing Silicone Repair is the incredible new tape that can be used to repair almost anything from an emergency repair to a water hose or air pipe to insulating electrical wires or connections.
Everbuild Silweld Self Fusing Silicone Repair Black 3m
Everbuild Silweld Self Fusing Silicone Repair is the incredible new tape that can be used to repair almost anything from an emergency repair to a water hose or air pipe to insulating electrical wires or connections.
It creates an air tight watertight seal in seconds without the need for any adhesive and it even works under water!
Everbuild Silweld Self Fusing Silicone Repair is an excellent electrical insulator up to 8,000 volts it withstands extreme temperatures from -65 to 260ºC and even withstands pressure to 700psi. Silweld also resists petrol oils acids solvents salt water and UV rays. Silweld is so diverse that it can be used for permanent or temporary repairs to just about anything:
- U bends
- All pipes and hoses - Electrical insulation & sealing electrical wires and connections
- Binding rope ends
- Corrosion protection
- And many more uses.
Size: 3 metres
To Download Product Data Sheet (PDF) for Everbuild Silweld Tape Click HERE
Everbuild Silweld Self Fusing Silicone Repair Black Usage Instructions
Limitations:
Silweld starts fusing immediately upon application and is not re-usable.
Should you wish to reposition the tape, unwrap the tape within 30 seconds to re-use.
Application: Ensure surfaces are clean and free from dust.
Separate the tape from the liner and press the tape firmly onto the surface, starting at the repair point. Work the tape to 3 to 4 centimetres either side of the repair, stretching while wrapping. To ensure a good seal wrap the tape with a two thirds overlap, the tape should be stretched to twice its original length, the longer the stretch the stronger the seal will be.
For non-pressure repairs it is advised to wrap the tape around at least 3 to 4 times, for pressure repairs increase this to 6 to 7 times.
Everbuild Silweld Self Fusing Silicone Repair Black Technical Information
Barcode: 5029347611279
Weight: 0.09kg
Specific Data :Adhesive: Non Adhesive, self-amalgamating
Type Of Film: Silicone Rubber
Pressure resistance: Up to 700psi
Water Resistance: Fully Waterproof
Service Temperature: -65°C to +260°C
UV Resistance: Excellent
Storage: Store in cool dry conditions between 5 and 250°C. Safe in normal use however as a precaution keep plastic outer packaging away from children. SHELF LIFE- 36 MONTHS
Everbuild Silweld Self Fusing Silicone Repair Black 3m
Everbuild Silweld Self Fusing Silicone Repair is the incredible new tape that can be used to repair almost anything from an emergency repair to a water hose or air pipe to insulating electrical wires or connections.
It creates an air tight watertight seal in seconds without the need for any adhesive and it even works under water!
Everbuild Silweld Self Fusing Silicone Repair is an excellent electrical insulator up to 8,000 volts it withstands extreme temperatures from -65 to 260ºC and even withstands pressure to 700psi. Silweld also resists petrol oils acids solvents salt water and UV rays. Silweld is so diverse that it can be used for permanent or temporary repairs to just about anything:
- U bends
- All pipes and hoses - Electrical insulation & sealing electrical wires and connections
- Binding rope ends
- Corrosion protection
- And many more uses.
Size: 3 metres
To Download Product Data Sheet (PDF) for Everbuild Silweld Tape Click HERE
Everbuild Silweld Self Fusing Silicone Repair Black Usage Instructions
Limitations:
Silweld starts fusing immediately upon application and is not re-usable.
Should you wish to reposition the tape, unwrap the tape within 30 seconds to re-use.
Application: Ensure surfaces are clean and free from dust.
Separate the tape from the liner and press the tape firmly onto the surface, starting at the repair point. Work the tape to 3 to 4 centimetres either side of the repair, stretching while wrapping. To ensure a good seal wrap the tape with a two thirds overlap, the tape should be stretched to twice its original length, the longer the stretch the stronger the seal will be.
For non-pressure repairs it is advised to wrap the tape around at least 3 to 4 times, for pressure repairs increase this to 6 to 7 times.
Everbuild Silweld Self Fusing Silicone Repair Black Technical Information
Barcode: 5029347611279
Weight: 0.09kg
Specific Data :Adhesive: Non Adhesive, self-amalgamating
Type Of Film: Silicone Rubber
Pressure resistance: Up to 700psi
Water Resistance: Fully Waterproof
Service Temperature: -65°C to +260°C
UV Resistance: Excellent
Storage: Store in cool dry conditions between 5 and 250°C. Safe in normal use however as a precaution keep plastic outer packaging away from children. SHELF LIFE- 36 MONTHS