Heldite Jointing Compound 7ml

Heldite Jointing Compound is a high-performance sealant for
preventing leakage of Petrol, Diesel Fuel, Hydraulic Fluids, Oils,
Paraffin, LPG’s, Water, Steam and Gases in all branches of Automotive,
Auto mechanical, Electrical and General Engineering, Plumbing, Heating
and Pipeline Services. Heldite is a thick liquid compound that can be
applied to any joint either with or without a gasket.

It will effectively seal bolted, flanged or screwed joints and as it
is in a liquid form it is economical to use and does not tend to squeeze
out into the interior of a joint and cause damage. Heldite is
non-abrasive and will not damage highly machined joint faces; the
combination of thermal, plastic and adhesive factors in this jointing
compound is unique in the sealant formulation. The plasticity combats
the effects of temperature and pressure changes, shifting levels and
stresses associated with the assembly of dissimilar metals such as
aluminium housings bolted to cast blocks. The adhesive factor not only
assists gasket location but has been shown to be an effective locking
sealant for imparting additional security to splines, studs and press
fit bearings.

Being non-abrasive, suitable for use with metals, i.e. steel, aluminium and brass, in combination with dissimilar metals, rubbers etc. Also waterproof, inert and anti-corrosive. Suitable for use with oils, fuels, hydraulic fluids, non-potable water, gases and coolants. Unaffected between -40°C to +350 °C. Prevents electrolytic action from the effects of sea water. PASSES COMMERCIAL SPECIFICATION 68-145/I. Resistant to 18% hydrochloric and 5% sulphuric acids.

To Download Further Information on Heldite Jointing Compound Click HERE

Coverage: Approximately 16m² per litre

Size: 7ml
Also Available Heldite Jointing Compound 125ml, Heldite Jointing Compound 250ml and Heldite Jointing Compound 500ml

For use with Potable Water Applications use: Heldite Jointing Compound H2OK For Potable Water