HG Laminate Vinyl and PVC Cleaner Extra Strong Usage Instructions

For Removing Stubborn Dirt: Dilute HG Laminate Vinyl and PVC Cleaner Extra Strong with water at a ratio of 1:5. Using a floor cloth, immerse the cloth in the solution and wring out well so that it is slightly damp (not too wet!). Regularly rinse the cloth in the HG Laminate Cleaner Extra Strong solution and always wring out well. The floor does not have to be wiped or dried afterwards. Stains or very stubborn dirt can be removed using a cloth applied with a little undiluted.

Directions for pre-treating before applying <border=”0″>HG Laminate Vinyl and PVC Protector: Only follow these instructions for floors that have sealed joints. Dilute with water at a ratio of 1:5. Using a floor cloth, immerse the cloth in the solution and wring out well. Regularly rinse the cloth in the solution and wring out well. The floor does not need to be wiped or dried afterwards. In the case of very stubborn dirt, treat the floor in sections, leave the solution to penetrate for a few minutes and then wipe again.

Directions for Removing <border=”0″>HG Laminate Vinyl and PVC Protector: Only follow these instructions for floors that have sealed joints. <border=”0″>HG Laminate Vinyl and PVC Protector must be removed using undliuted. It is preferable to treat the floor in sections. Do not make the floor too wet: apply as little as possible using a floor cloth. Leave to penetrate for for a few minutes. Then wipe up the solution, regularly rinsing the floor cloth. Wipe the floor again a few times afterwards with a well wrung-out cloth and clean water.

Attention: Carefully follow the directions for use so that the laminate does not become too wet. Making the floor too wet can cause the joints to swell.</border=”0″></border=”0″></border=”0″>

HG Laminate Vinyl and PVC Cleaner Extra Strong Technical Information

Barcode: 8711577009427
Weight: 1.11kg

Product Safety

Danger

• Causes serious eye damage.