image

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960


Liberon Home ColourCare Decorative Floor Varnish 1 Litre Melting Metallic

Product Code: 117357
£17.99
RRP £18.95 | SAVE £0.96
Item in Stock
(0 review)
Home ColourCare Decorative Floor Varnish is ideal for decorating and protecting wooden and laminate floors with minimal preparation required.
Product Features:
Highly Durable Protection
Decorative Coloured Finish
No Undercoat Required
Suitable for Laminate Flooring
6 Contemporary Colours

Home ColourCare Decorative Floor Varnish is ideal for decorating and protecting wooden and laminate floors with minimal preparation required.
This varnish is resistant to wear and tear from high traffic and stains and can be used to create a contemporary and innovative finish on varnished and pre-varnished floor made from European or exotic woods or laminates.


Size: 1 Litre  Also available in 2.5 Litre

Finish: Metallic

HOW TO USE

PREPARATION

Preparation of the surface is essential.  The prepared surface must be clean, dry and free of grease.

  • Bare wooden floors: sand lightly with 120 grit sand paper and remove all dust.
  • Varnished, pre-varnished or painted wooden floors:
    • In good condition:  wash, rinse and leave to dry.  Sand lightly with 240 grit sand paper and remove dust.
    • Partially worn condition:  Sand back to bare wood and remove all dust.
  • Waaxed or oiled wooden floors: Remove wax using a cleaner then mechanically sand twice (once with 60 grit sand paper, then with 120 grit) until bare wood is reached.  Remove dust carefully.
  • Laminate Flooring:  Wash, rinse and leave to dry.  Sand lightly with a 24o grit sand paper and remove dust.
Any grease or film can stop the paint adhering properly.  Washing the surface is therefore essential.  Use a sugar soap cleaner.

APPLICATION

  • Ideal application conditions between 12 and 25°C, in dry weather.
  • Stir the floor varnish before and during use with a long wide stick, working around the bottom of the tin to mix thoroughly.
  • Apply the varnish using a soft-bristled brush or 3 to 5 mm short pile roller.
  • Apply the varnish in regular, criss-cross strokes and spread evenly. Finish in the direction of the grain.
  • Leave to dry for 3 hours.
  • Apply the second coat of varnish. Apply a third coat if necessary.
  • Leave to dry for 12 hours. Use the room with care in the first few days following application of the varnish.
  • Optimal resistance is obtained after two weeks.

Coverage:

1L - 16m²

Location:

Interior

Drying Time:

3 hours recoat, 12 hours fully dry

Application:

Brush or roller

Tool Cleaning:

Water

Barcode: 3282391042525
Weight: 1kg

There are no reviews for this product.
Write a review

Home ColourCare Decorative Floor Varnish is ideal for decorating and protecting wooden and laminate floors with minimal preparation required.
This varnish is resistant to wear and tear from high traffic and stains and can be used to create a contemporary and innovative finish on varnished and pre-varnished floor made from European or exotic woods or laminates.


Size: 1 Litre  Also available in 2.5 Litre

Finish: Metallic

HOW TO USE

PREPARATION

Preparation of the surface is essential.  The prepared surface must be clean, dry and free of grease.

  • Bare wooden floors: sand lightly with 120 grit sand paper and remove all dust.
  • Varnished, pre-varnished or painted wooden floors:
    • In good condition:  wash, rinse and leave to dry.  Sand lightly with 240 grit sand paper and remove dust.
    • Partially worn condition:  Sand back to bare wood and remove all dust.
  • Waaxed or oiled wooden floors: Remove wax using a cleaner then mechanically sand twice (once with 60 grit sand paper, then with 120 grit) until bare wood is reached.  Remove dust carefully.
  • Laminate Flooring:  Wash, rinse and leave to dry.  Sand lightly with a 24o grit sand paper and remove dust.
Any grease or film can stop the paint adhering properly.  Washing the surface is therefore essential.  Use a sugar soap cleaner.

APPLICATION

  • Ideal application conditions between 12 and 25°C, in dry weather.
  • Stir the floor varnish before and during use with a long wide stick, working around the bottom of the tin to mix thoroughly.
  • Apply the varnish using a soft-bristled brush or 3 to 5 mm short pile roller.
  • Apply the varnish in regular, criss-cross strokes and spread evenly. Finish in the direction of the grain.
  • Leave to dry for 3 hours.
  • Apply the second coat of varnish. Apply a third coat if necessary.
  • Leave to dry for 12 hours. Use the room with care in the first few days following application of the varnish.
  • Optimal resistance is obtained after two weeks.

Coverage:

1L - 16m²

Location:

Interior

Drying Time:

3 hours recoat, 12 hours fully dry

Application:

Brush or roller

Tool Cleaning:

Water

Barcode: 3282391042525
Weight: 1kg

There are no reviews for this product.
Write a review

image
Free UK Delivery
On Orders Over £75
100% Secure Shipping
Pay with PayPal or Debit/Credit Card
image
We're here for you
Have a question? Call 01733 241960