Liberon Quick Drying Tung Oil Usage Instructions

Preparation: Ensure the wood surface is bare: remove any wax finishes with Liberon Wax and Polish Remover and any varnish or oil finishes with Liberon Fine Wood Stripper. The surface should be clean, dry and ensure the surface is dust free.
Application: Apply Quick Drying Tung Oil using a brush or lint-free cotton cloth. Allow the oil to penetrate for 20 minutes then wipe off the excess oil using a clean lint-free cloth. Allow to dry for 4 hours.

Apply further coats of Quick Drying Tung Oil as above, we recommend at least 4 coats on most woods. To check the surface is protected drop some water onto the wood and if the water beads, the surface is sealed.  Allow 24 hours for the final coat to dry. For best results gently rub with Liberon Ultra Fine Steel Wool (0000) between coats. Furniture items may be finished with Liberon Wax Polish Black Bison for an improved lustre.

Important: Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Cleaning and maintenance: Quick Drying Tung Oil must be maintained on a regular basis. Apply at least once or twice a year or more if required, depending upon usage.

Drying time: 4 hours per coat, 24 hours final

Liberon Quick Drying Tung Oil Technical Information

Barcode: 3282391033646
Weight: 0.29kg

Precautions:
– Wear suitable clothing and protective gloves.
– Tung Oil is extracted from nuts and may cause an allergic reaction.
– Store Liberon Tung Oil at a temperature above 5 °C. Always replace the lid otherwise the oil can deteriorate.
– Oily cloths can self combust. Do not leave impregnated cloths in bundles.
– Before discarding lay them flat outside to dry to avoid a fire hazard.
– If the excess is not removed and the surface becomes sticky, wipe with white spirit to
remove the sticky film and allow to dry before continuing.