Out of stock

• Product Features
  • Non drip - ideal for vertical surfaces
  • Removes paint
  • varnish and lacquer
  • Water and solvent washable
  • Strips up to twice the paint layers and stays active longer
  • Green coloured - see where you have applied it
• Description

  NitroMors All Purpose Paint and Varnish Remover 4 Litre

  New Formula Nitromors All-Purpose Paint and Varnish Remover is a new double strength, faster acting paint stripper suitable for use on wood, metal and masonry. New Nitromors is the direct replacement for Original Nitromors paint stripper, it is a thick solvent based, but does not contain dichloromethane.

  Please Note: Tests have shown that after application New Formula Nitromors takes generally 2-3 minutes longer for the paint to blister, has a longer working time, but requires less applications to get back to bare wood than the original Nitromors.

  + Non drip – ideal for vertical surfaces
  + Green coloured – see where you have applied it
  + Removes paint, varnish and lacquer
  + Water and solvent washable
  + Strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers.

  Coverage: 4 Litre covers up to 10m²

  Size: 4 Litre
  Also Available: NitroMors All Purpose Paint and Varnish Remover 375ml and 750ml NitroMors All Purpose Paint and Varnish Remover 750ml 

  and NitroMors All Purpose Paint and Varnish Remover 2 Litre

• How to use

  NitroMors All Purpose Paint and Varnish Remover Usage Instructions

  Preparation: 
  + Wear gloves and safety goggles. 
  + Work outside if possible.
  + Ensure good ventilation when working indoors.
  + Protect surrounding area with polythene sheeting.
  + Do not use in direct sunlight.
  + Not suitable for removing car paint or for contact with plastics.

  Usage Instructions:
  1. Pour NitroMors All Purpose Paint and Varnish Remover into overcap. Replace cap immediately. Apply a thick coat by brush with a dabbing action.
  Do not brush out. Only apply to areas up to 0.5m². When paint has blistered (5-10 minutes) apply second coat, working into blisters. Leave for 40 minutes. Do not allow to dry out.
  2. Remove blistered/softened point with scraper or shavehook. Repeat process if necessary. Remove traces of stubborn paint by rubbing with wire wool dipped in NitroMors All Purpose Paint and Varnish Remover.
  3. Wash down with detergent in cold water (use white spirit on fine woods to avoid raising the grain). Allow to dry thoroughly and rub down with fine sandpaper or wire wool.

• Technical Information

  NitroMors All Purpose Paint and Varnish Remover Technical Information

  Barcode: 5010373142783
  Weight: 4.39kg

  To Download the Safety Data Sheet (PDF) for NitroMors All Purpose Paint and Varnish Remover Click HERE

  Precautions: Decant New Nitromors into a suitable glass or metal container. Only apply to small areas at a time, ensuring there is good ventilation and all sources of ignition are extinguished.

  No Smoking. Please read the detailed safety instructions on the packaging.
  

  NEW Nitromors is not suitable for removing car paints or for contact with plastics.
  

  Safety: Suitable protective Heavy Duty Gloves and Safety Goggles should be worn.
• Product Reviews