NitroMors All Purpose Paint and Varnish Remover 750ml

Name: NitroMors All Purpose Paint and Varnish Remover 750ml
SKU: W51267
Availability: InStock

Product Code: W51267

Ask a question
about this product

£12.95 inc. VAT

£10.79 ex. VAT

RRP ~~£14.69~~ | SAVE £1.74RRP ~~£12.24~~ | SAVE £1.45

Nitromors All Purpose Paint and Varnish Remover is a fast acting dichloromethane free formula.

Product Features
- Non drip - ideal for vertical surfaces
- Removes paint
- varnish and lacquer
- Water and solvent washable
- Strips up to twice the paint layers and stays active longer
- Green coloured - see where you have applied it
Description
NitroMors All Purpose Paint and Varnish Remover 750ml
Nitromors All Purpose Paint and Varnish Remover is a fast acting dichloromethane free formula. Strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers. Tough on paint and kind to wood. An ideal solution for your DIY projects.
+ Non drip – ideal for vertical surfaces
+ Green coloured – see where you have applied it
+ Removes paint, varnish and lacquer
+ Water and solvent washable
+ Strips up to twice the paint layers and stays active longer compared to dichloromethane based paintremovers.
Coverage: 750ml covers up to 2m²
Size: 750ml
Also Available: NitroMors All Purpose Paint and Varnish Remover 375ml and NitroMors All Purpose Paint and Varnish Remover 2 Litre
How to use
NitroMors All Purpose Paint and Varnish Remover Usage Instructions
Preparation:
+ Wear gloves and safety goggles.
+ Work outside if possible.
+ Ensure good ventilation when working indoors.
+ Protect surrounding area with polythene sheeting.
+ Do not use in direct sunlight.
+ Not suitable for removing car paint or for contact with plastics.
Usage Instructions:
1. Pour NitroMors All Purpose Paint and Varnish Remover into overcap. Replace cap immediately. Apply a thick coat by brush with a dabbing action.
Do not brush out.
Only apply to areas up to 0.5m².
When paint has blistered (5-10 minutes) apply second coat, working into blisters. Leave for 40 minutes.
Do not allow to dry out.
2. Remove blistered/softened point with scraper or shavehook. Repeat process if necessary. Remove traces of stubborn paint by rubbing with wire wool dipped in NitroMors All Purpose Paint and Varnish Remover.
3. Wash down with detergent in cold water (use white spirit on fine woods to avoid raising the grain). Allow to dry thoroughly and rub down with fine sandpaper or wire wool.
Technical Information
NitroMors All Purpose Paint and Varnish Remover Technical Information
Barcode: 5010305004424
Weight: 0.81kg
To Download the Safety Data Sheet (PDF) for New Nitromors Click HERE
Product Reviews