Pure Spa Whirlpool Set Usage Instructions

Sanitising Tablets 1. After each use of the bath and before emptying, put 1 tablet into the bath water. 2. Switch on the system and let it run for 2-3 minutes. 3. Switch off the system and drain as normal. 4. Your whirlpool bath has now been effectively treated.

Cleaner and Degreaser: Recommended Dilution:  (Average size bath)
Dilute Pure Spa Whirlpool Cleaner and Degreaser with water up to 600:1 – as a guide this is approx 250mls of cleaner per average bath of 150 Litres of water (this is based on the average volume of a 1700mm x 750mm bath). Increase for larger baths.
For an Intensive/purge clean eg. if your bath has not been cleaned in some time, Pure Spa Whirlpool Cleaner and Degreaser can be used up to max dilution of 80:1. This could mean using half – one full bottle of cleaner per application, the solution may then be left in overnight. (see user instructions on bottle).

1. Fill the bath with warm water (approx. 35ºC) to cover the jets by approx. 1-2 inches.
2. Add the correct amount of Pure Spa Whirlpool Cleaner and Degreaser to the water.
3. Close the air control (set to minimum) and run whirlpool system for 2-5 minutes. Do Not leave unattended as the product may foam.
4. Turn off and let stand for approx. 2-3 hours or overnight if necessary, activate whirlpool system intermittently to agitate the cleaning solution through the pipework.
5. Drain the bath, refill with cold water, run whirlpool system for 2 minutes, drain the bath and wipe interior surface.

Pure Spa Whirlpool Starter Set Technical Information

Barcode: 5060217150016
Weight: 2.62kg

Cleaner and Degreaser: Health and Safety: Non-hazardous. In the event of eye contact, rinse with plenty of clean water, if irritation persists immediate medical attention should be sought. DO NOT INGEST DO NOT MIX WITH OTHER CHEMICALS KEEP OUT OF REACH OF CHILDREN
Contains: Silicates < 2% Cationic suractants < 2% Non Ionic Surfactants < 10% Nitrilotriacetate < 5%

Pure-Spa Sanitiser Tablets: These small, white tablets are based on dry chlorine donor, sodium dichloroisocyanurate (NaDCC) which is blended with effervescent components before being compressed into tablet form. The result is a fast-dissolving, highly convenient, safer and more accurate alternative to liquid bleach.
Chlorine is regarded by many, including the Health Service and the Government, as one of the most effective disinfectants in the fight against disease. That is why it is recommended by the world’s major authorities for use against HIV (AIDS) and Hepatitis B viruses and why almost all of the world’s piped water supplies are treated with chlorine
Disinfecting solutions prepared from Pure-Spa Sanitising Tablets containing NaDCC are fast acting and have a complete spectrum of biocidal activity. Bacteria, bacterial spores, algae, fungi, protozoa and viruses are all sensitive to their effects.
The problem of corrosion associated with liquid bleach has often resulted in the use of more expensive and less effective alternatives. It has been demonstrated that chlorine solutions produced using NaDCC tablets are in general significantly less corrosive.