Rustins Advanced Wood Preserver Clear Usage Instructions

Preparation: Ensure that timber surfaces are clean and free from previous coatings, grease and contaminants. Surfaces may be damp but the preserver should not be applied to decayed wood which should be replaced.
Application: Shake well and stir before use. Apply by brush or coarse spray. For outdoor applications the Clear Preserver needs to be over coated with an outdoor varnish or oil.
Coats: Apply a minimum of 2 coats.
Drying Time: Between 10 – 15 minutes depending on temperature and humidity.
Re-coating Time: It is important that the second application is applied before the first is dry.
Application Temp: Ideally 15 – 25°C. Do not apply below 10°C.
Maintenance: Re-apply periodically.
Compatibility: Not compatible with previous coatings, grease and contaminants.
Settlement: Shake well and stir before use or colour obtained will not be correct.
Clean-Up: Clean equipment with water.

Rustins Advanced Wood Preserver Clear Technical Information

Barcode: 5015332100118
Weight: 5.17Kg

Settlement: Shake well and stir before use or colour obtained will not be correct.
Shelf-life/Storage: Store in a cool dry place with the lid tightly closed. Use within 2 years of manufacture.
Hazards: Very toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. Keep out of reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of water. Wear protective clothing, gloves and eye/face protection.

To Download the Safety Data Sheet (PDF) for Rustins Advanced Wood Preserver Click HERE