Rustins All Star Wood Treatment Clear Usage Instructions

Preparation:  Ensure that timber surfaces are clean and free from previous coatings, grease and contaminants. Surfaces may be damp but the product should not be applied to decayed wood which will need to be removed and replaced.
Application: Shake well and stir before use. Apply two coats using a brush or low pressure spray. EXTERIOR application must be by BRUSH ONLY. Depending on the drying conditions, the second application should be applied before the first is dry. Ensure all end grain is thoroughly soaked as this is especially prone to water ingress and resulting decay.
Re- Coating Time: Temperature and humidity will affect the rate of drying. it is important that after the first application, the surface is not allowed to dry out and ideally should be damp when the second application is carried out. The timber should be allowed to dry for 48 hours before over-coating.

Coverage: Apply at a rate of 100ml / m² .(1 Litre per 10 m²):
For a preventative use against wood boring beetles.

Apply at a rate of 152.8 – 200ml / m². (1 Litre per 5 m²):
For a preventative use against wood rotting fungi.

Apply at a rate of 200ml / m² (1 Litre per 5 m²):
For a preventative use against wood boring beetles, termites and wood rotting fungi.

Apply at a rate of 300ml / m² (1 Litre per 3.3m²):
For Curative use against wood boring beetles.

Cleaning: Remove as much product as possible and return to this container. Brushes should then be cleaned immediately with water.

Rustins All Star Wood Treatment Clear Technical Information

Barcode: 5015332003662
Weight: 5.21kg