Rustins Decorators Varnish for Interior/Exterior Use Dead Flat Usage Instructions

Preparation: The surface must be clean and free from dust, dirt, oil and contamination.
Application: Apply thin coats using a synthetic varnish brush. Dilute first coat with 10% water if to be used over porous surfaces. Ideally, apply between 15 – 25°C. Avoid damp/high humidity conditions. Do not apply to hot surfaces or in strong
 sunlight if possible or if rain is likely. Three coats are recommended for high durability. Always test for compatibility before covering the whole area.
Re-coating Time: Further coats can be applied once the previous coat is dry. This will be approximately 1 hour depending on the temperature and humidity at the time of application.
Cleaning: Remove as much product as possible and return to this container. Brushes should then be cleaned immediately with water. If the brushes become hard, they may be cleaned with Rustins Brush Restorer or Rustins Cellulose Thinners.
Disposal (pollution prevention): Some local authorities have special facilities for the disposal of waste paints/varnishes /coatings. Do not empty the product into drains or watercourses.
Storage: Store in a cool dry place with the lid tightly closed. Protect from frost.

Rustins Decorators Varnish for Interior/Exterior Use Dead Flat Technical Information

Weight: 0.6kg
Barcode: 5015332005475

Health and Safety: Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes-wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water.