Rustins Original Danish Oil 1 Litre

Name: Rustins Original Danish Oil 1 Litre
SKU: DANO1000
Availability: InStock

Product Code: DANO1000

Ask a question
about this product

£18.62 inc. VAT

£15.52 ex. VAT

RRP ~~£21.49~~ | SAVE £2.87RRP ~~£17.91~~ | SAVE £2.39

Rustins Original Danish Oil is a unique formulation developed by Rustins that is suitable for all types of wood. It differs from Teak Oil in that it contains special ingredients to give it a low lustre finish.

Product Features
- Unique blend
- suitable for all types of wood
- Gives a soft lustrous finish
- Easy to use wipe on finish
- Brings out the beauty of wood
- Formulated to produce an attractive and durable finish
Description
Rustins Original Danish Oil 1 Litre
Rustins Danish Oil is a unique formulation developed by Rustins that is suitable for all types of wood. It differs from Teak Oil in that it contains special ingredients to give it a low lustre finish. It is an easy-to-use wipe-on finish, which brings out the beauty of the timber and gives a natural, open-grained, soft, lustrous finish. Ideal for all woods and is excellent on turned woodwork.
- Type: A blend of oils, resins and driers, formulated to produce an attractive and durable finish. The finish is Satin. For a gloss finish, use Rustins Teak Oil.
- Special Features: Brings out the natural beauty of wood and veneered surfaces, gives a natural, open-grained, low lustre finish. Easy to maintain.
  Coverage: Approximately 14m² per litre per coat, depending on the absorbency of the wood.
- Compatibility Danish Oil may be used over the following Rustins products: Rustins Wood Dye, Rustins Grainfiller and Rustins Wood Filler. The Rustins Wood Dye may also be added to Danish Oil. Do not exceed 30%. Rustins Polyurethane Varnish may be applied over Rustins Danish Oil at any time, and the product can also be used as a wood primer before applying undercoat. The surface must be clean before varnishing.
- Finish: Satin
- Size: 1 Litre
How to use
Rustins Original Danish Oil Usage Instructions
Intended Use: For all interior bare wood and joinery.
Preparation: The bare wood must be clean, smooth, dry and free from wax, dust and contaminants. Remove wax by scrubbing with white spirit or Rustins Surface Cleaner and a scouring pad, then wipe away whilst still wet with clean rags. Existing paint and varnishes should be removed with Rustins Strypit Paint and Varnish Stripper. Bare wood may be dyed before coating with Rustins Wood Dye. Do not apply Rustins Knotting.
Application: Apply liberally with a clean rag or brush and wipe off the surplus oil after a few minutes. Nibs may be removed from the final coat by applying oil with a scouring pad, rubbing in the direction of the grain, then wiping away the surplus with clean rags or paper kitchen towels.
Coats: 3 coats should be applied to bare wood.Drying Time: 4-6 hours depending on temperature and humidity.Re-coating Time: Re-coat once the previous coat is dry.
Application Temp. Ideally 15-25°C, do not apply below 5°C.
Maintenance: Periodic re-oiling is required. Clean surfaces before re-oiling using White Spirit
Settlement: STIR WELL BEFORE USE or product will dry to a gloss finish.
Technical Information
Rustins Original Danish Oil Technical Information
Barcode: 5015332200023
Weight: 1.15 Kg
To Download the Safety Data Sheet (PDF) for Rustins Danish Oil Click HERE

Shelf-life/Storage: Many years if stored in original, tightly closed container in normal cool, dry conditions.Hazards. It is recommended that the oil is transferred to a smaller container as it is used up to minimise the airspace over the oil as this can cause the formation of a solid gel.

Hazards: Flammable – Avoid contact with eyes and skin. Use in a well ventilated area. Keep out of reach of children. Keep away from sources of ignition – no smoking. Keep container tightly closed. A full safety data sheet is available upon request or on Rustins Web Site. Important: Rags used for oiling should be laid out flat to dry; otherwise they may catch fire due to spontaneous combustion.
Product Reviews