Out of stock

• Product Features
  • Does not yellow or craze with age
  • For use on wood, chipboard, MDF, cork, laminates, slate and stone
  • Resistant to scratching, abrasion, most solvents, weak acids and alkalis
  • Almost colourless, but some woods change colour when coated
  • Coverage 13-15m² per Litre, 1 coat, depending on the absorbency of the wood.
• Description

  Rustins Clear Plastic Floor Coating Satin 1 Litre

  Clear Plastic Floor Coating Satin is a two-part cold cure lacquer with excellent adhesion and durability. Almost colourless and will not craze or yellow on ageing. Resistant to scratching, abrasion, most solvents, weak acids and alkalis. Can be applied to wood, cork, chipboard, MDF, laminates, slate and stone. Re-coatable after 1- 1.5 hours, floor can be used 2 hours after last coat has been applied.

  Intended Use: Bare wood, hardboard, MDF, unsealed cork, slate, and vinyl tiles. For use on interior floors only.

  Type: A two-part cold cure finish, based on Urea Formaldehyde resins, plasticised with alkyd.

  Special Features: Quick-drying. Non-yellowing on ageing. The finish is highly durable, resistant to impact, abrasion and solvents. Enhances the colour of the wood. The coating is almost colourless, but some woods change colour when coated. See product packaging for further information.
  Coverage 13-15m² per Litre, 1 coat, depending on the absorbency of the wood.

  Finish: Satin
  Also available: Rustins Clear Plastic Floor Coating Gloss Finish

  Size: 1 Litre

• How to use

  Rustins Plastic Floor Coating Satin Usage Instructions

  Preparation: The surface must be clean, smooth, dry and free from wax, dust and contaminants. Read the full instructions on the tin. Our sheet on renovating floors contains further information. Nail holes and small cracks may be filled with Rustin’s Wood filler. Bare wood may be dyed before coating with Rustins Wood Dye. Other brands of dye, stain or paints may be incompatible. Do not apply Knotting or Sanding Sealer.
  

  Application: Using a large brush or varnish roller, apply evenly and liberally, finishing in the direction of the grain. Rustin’s Plastic Coating Thinners (up to 10%) may be added to aid the application in hot weather. No other thinners may be added to the coating.
  

  Coats: 2 coats are usually sufficient on hardwood floors, but in heavy traffic areas, apply 3 coats. Softwoods and cork may require a minimum of 3 coats, depending on the absorbency. Commercial premises may require 4 coats.
  

  Drying Time: The coating is generally touch-dry within 30 minutes – 1 hour, depending on the temperature.
  

  Re-coating Time: May be re-coated after a minimum of 1 hour.
  

  Application Temp. Ideally 15-25ºC. Do not use below 15ºC, or in conditions of high humidity.
  

  Maintenance: The coating will accept light foot traffic 2 hours after the final coat and will take 7 days to fully harden. During this period, it should be protected from heavy wear and spills. Afterwards, the surface may be kept clean by mopping with a mild detergent solution. To restore the gloss, use Rustin’s Floor Shine. Worn areas may be re-coated once cleaned and sanded, to provide a key. It is not necessary to re-coat the whole floor.
  

  Compatibility: The coating may be used over Rustins Wood filler, or Wood Dye and wood may be bleached before coating, with Rustins Wood Bleach. Important. If any other products are used, such as timber treatments or other brands of dye, stain or paints, these must be tested first for compatibility.
  

  Settlement: STIR WELL BEFORE AND DURING USE. Satin finishes may dry glossy if not stirred.
  

  Clean-Up: Clean equipment immediately after use with Rustin’s Plastic Coating Thinners or Rustin’s Cellulose Thinners, as once hardened, the coating cannot be removed.
  
• Technical Information

  Rustins Plastic Floor Coating Satin Technical Information

  Barcode: 5015332400614
  Weight: 1.20 Kg

  

  Shelf-life/Storage: Many years if stored in original, tightly closed containers in normal conditions.
  Hazards: Highly flammable. Keep away from sources of ignition- no smoking. Avoid contact with skin and eyes. Do not empty into drains. Wear suitable gloves. Keep container tightly closed.

• Product Reviews