Out of stock

• Product Features
  • For interior use
  • Stains and varnishes in one
  • Tough and durable
  • High abrasion and mechanical impact resistance
  • Resistant to oil
  • water and many chemicals
• Description

  Rustins Polyurethane Varnish Gloss Pine 500ml

  Rustins Polyurethane Varnish Gloss Pine is an attractive natural wood shade available in a gloss finish that stains and varnishes in one operation.

  Intended Use: Bare wood, hardboard, MDF and unsealed cork. Interior use only. For floors, use Rustins Polyurethane Floor Sealer
  Type: A high build, air-drying coloured polyurethane varnish. The finish produced is tough, durable and resistant to oil, water and many chemicals.
  Special Features: Stains and varnishes in one. High abrasion and mechanical impact resistance.
  Coverage: 14-16m² per Litre, 1 coat, depending on the absorbency of the surface.

  Colour: Pine – Also available in Dark Oak, Mahogany, Antique Pine, Oak, Teak and Walnut
  Finish: Gloss – Also available in Satin Finish
  Size: 500ml

  Also available in 250ml and 1 Litre Sizes

• How to use

  Rustins Polyurethane Varnish Gloss Pine Usage Instructions

  Preparation: The surface must be clean, smooth, sound, dry and free from wax, dust and contaminants. Remove wax by rubbing with White Spirit and a plastic souring pad and wipe away whilst still wet. Cracks may be filled with Rustins Wood filler.
  Application: Apply evenly, finishing in the direction of the grain using a good quality brush. The first coat may be thinned with White Spirit (1 part to 8 parts varnish), to act as a sealer when applying to absorbent surfaces. The colour will darken with additional coats.Coats: 2 coats are usually sufficient on wood. Cork and more absorbent surfaces will require extra coats.Drying Time: Touch dry in approximately 2-4 hours, depending on the temperature and humidity.
  Re-coating Time: Re-coat when the previous coat is hard dry, typically within 4-8 hours depending on the temperature and humidity.
  Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.
  Maintenance: The varnish will take about 24 hours to dry fully. Afterwards, the surface may be cleaned by wiping with a mild detergent solution when necessary. To restore gloss, wax polish may be applied. Worn areas may be re-coated once cleaned, de-waxed and lightly sanded to provide a key.
  Compatibility: The varnish may be used over the following Rustins products; Rustins Wood filler, Grain filler and Rustins Polyurethane Varnish. The colour will darken with additional coats. A lighter shade can be obtained by diluting with White Spirit. Rustins Polyurethane Clear Varnish may be applied over Varnish Stain without altering the colour.
  Settlement: STIR WELL BEFORE USE. Satin and Matt finishes may dry glossy if not thoroughly stirred.
  Clean-Up: Use White Spirit or Rustins Brush Cleaner whilst still wet. If dried on, clean equipment and brushes with Rustins Brush Restorer.

• Technical Information

  Rustins Polyurethane Varnish Gloss Pine Technical Information

  Barcode: 5015332432035
  Weight: 0.65kg

  Shelf-life/Storage: Many years if stored in original, tightly closed container in cool, dry conditions.
  Hazards: Flammable. Keep out of reach of children. Keep away from sources of ignition-no smoking. Avoid contact with eyes and skin, Use only in well ventilated areas.

• Product Reviews